News & press releases

Hits 2,111-2,120 of 3,071

Press releases | 03/07/2017

Developed for demanding applications: the new L538 wheel loader showcased at Conexpo

At Conexpo 2017, Liebherr presents the L538 Wheel Loader Tier 4f/Stage IV emission regulations compliant. This loader is one of the three models representing the new generation of mid-size loaders. Find out more

Press releases | 03/07/2017

Medium pressure pump added to the Liebherr portfolio of hydraulic components

Liebherr component division is presenting the newly developed LH30VO axial piston pump of swash plate design at Conexpo 2017. The medium pressure pump complements the existing product portfolio in the range of 280 bar (4,061 psi) nominal pressure and maximum pressure of up to 320 bar (4,641.21 psi), suited for mobile machinery use. The pump for all mobile applications with open circulation has a delivery rate of 45 cm³ (28.38 inches) per rotation and is already available with two of the most common controls. Find out more

Press releases | 03/06/2017

Liebherr Offshore Cranes Accessing New Markets

Liebherr’s maritime manufacturing plant in Rostock has been awarded the contract to supply the heavy-lift crane for the Orion, a new wind farm installation and platform decommissioning vessel ordered by DEME from COSCO (QiDong) Offshore, a subsidiary of COSCO Shipping Heavy Industry. The crane is rated at 3,000 tonnes at more than 50 metres, with a lifting height in excess of 170 meters and a designation of HLC (Heavy-Lift Crane) 295000. Delivery will be spring 2019. Find out more

News | 03/06/2017

Liebherr Offshore Cranes Accessing new Markets

News | 03/02/2017

Liebherr receives iF Design Award 2017

High-quality materials, a perfectly detailed finish and an exclusive design characterise the BluPerformance refrigerators. Liebherr Domestic Appliances won the iF Design Award for Product Design for these attributes. Find out more

Press releases | 03/02/2017

Liebherr mobile cranes successfully complete final bridge dismantling job in the dark and fog

Three massive prestressed concrete supports for a road bridge were dismantled under great time pressure near Osnabrück. The railway track under the bridge was shut to rail traffic for two nights. Crane contractors Sommer-Kranverleih from Bremen and Autokrane-Spallek from Ibbenbüren each brought an LTM 1300-6.2 to the site to complete the job. Find out more

Press releases | 03/02/2017

Efficient and comfortable: BRCM puts the Liebherr R 946 crawler excavator to work

French company BRCM (Budillon Rabatel Concassage Mobile) has put a new Liebherr R 946 crawler excavator into operation. The R 946 was added to BRCM's machine fleet in summer 2016 and ensures the crushers are supplied with material. After the first few months in operation the machine already stands out in terms of its capacity and particularly high level of driving and operating comfort. Find out more

Press releases | 03/01/2017

XPower wheel loader consumption figures now available in Liebherr fuel-saving calculator

Fuel consumption information for all XPower wheel loaders is now available in the Liebherr fuel-saving calculator. The consumption figures, compiled from live data, are constantly updated and provide information that demonstrates the outstanding efficiency of the XPower wheel loaders. Find out more

News | 02/28/2017

New diesel engine: in-line 6-cylinder engine with displacement of 18 litres expands portfolio

Liebherr expands its diesel engine product range. A further in-line 6-cylinder engine with 18-litre displacement will extend the portfolio in time for the introduction of the European Stage V emission standard. Customers in the off-road segment will thus be offered an additional product with proven Liebherr advantages in the performance range between 450 and 620kW. Find out more

Press releases | 02/27/2017

Sönke Jordt expands fleet with a Liebherr LTM 1250-5.1 mobile crane

Sönke Jordt GmbH & Co. KG based in Ratekau in Schleswig-Holstein took delivery of a new Liebherr LTM 1250-5.1 mobile crane at the manufacturing plant in Ehingen at the beginning of February. The 5-axle 250-tonne mobile crane represents an upwards expansion in the company's fleet. Liebherr's VarioBase® variable support base was an important factor in the decision. Find out more

Results per page
Results per page