Uutiset ja lehdistötiedotteet

Liebherr Presents New Generation 6 Dozer at the Conexpo Con/Agg 2014

Liebherr is proud to showcase the company’s latest technologies and innovations in earthmoving equipment during the Conexpo Con/Agg 2014. The new Generation 6 PR 736 dozer will be introduced to the American market during this construction equipment trade show in Las Vegas (USA). The PR 736 has an operating weight between 44,000 and 55,000 lb (20,000 and 25,000 kg).

Liebherr to show its new LTM 1300-6.2 six-axle Mobile Crane at the 2014 Conexpo

Liebherr will be showing its new 300 tonne (360 US-tons) mobile crane on a six-axle chassis at the Conexpo Con/Agg 2014. The LTM 1300-6.2 was unveiled at the Bauma 2013 and replaces the 250-tonne (300 US-tons) LTM 1250-6.1. Its 78 m (256 ft) telescopic boom means that this new six-axle mobile crane offers an additional 6 m (20 ft) in length over its predecessor. In addition its load capacity has been increased dramatically. The new LTM 1300-6.2 from Liebherr is the most powerful mobile crane in the 300 tonne (360 US-tons) class available on the market.

Liebherr to unveil its new LTM 1160-5.2 five-axle Mobile Crane at the Conexpo 2014

Liebherr will be unveiling a new 160-tonne (190 US-ton) mobile crane on a five-axle chassis, the successor to the LTM 1160-5.1, at the Conexpo Con/Agg 2014 in Las Vegas, USA. The load capacity of the new LTM 1160-5.2 has been increased by around 20-25% compared to its predecessor whilst the telescopic boom has remained at the same length of 62 m (203 ft). The vehicle width has been reduced from 3 m to 2.75 m (9’10’’ to 9’) which means that not only it is easier to drive on public roads but also considerably better on constricted sites. The superstructure of the new LTM 1160-5.2 is powered by the engine in the crane chassis using a mechanical shaft. This makes the new 5-axle vehicle the second crane model to feature the innovative single-engine drive concept which Liebherr first presented at the Bauma 2013 for the LTM 1300-6.2.

Liebherr brings the new 1,000 tonne (1,200 US-tons) LR 11000 Crawler Crane to Conexpo Con/Agg 2014

Conexpo Con/Agg 2014 in Las Vegas (USA) is the first occasion where Liebherr brings the new 1,000 tonnes (1,200 US-tons) crawler crane to the US. To supplement the crawler crane range between the LR 1750 and the LR 11350 Liebherr unveiled the new LR 11000 at the 2013 Bauma in Munich, Germany.

Liebherr presents its first Simulator for Operator Training on Deep Foundation Equipment at Conexpo 2014

The Liebherr simulator (LiSIM®) for deep foundation and lifting applications is one of Liebherr’s world premieres at Conexpo Con/Agg 2014 in Las Vegas (USA). Based on original machine software and hardware it increases both productivity and safety by providing a cost-effective and highly efficient operator training solution.

The 380 EC-B Flat-Top crane: A new dimension in efficiency and safety

Liebherr will be unveiling the 380 EC-B 16 Litronic Flat-Top crane at Conexpo Con/Agg 2014. With a maximum radius of 246 ft (75 m) this model has a lifting capacity at the tip of 7,500 lbs (3,400 kg). The 380 EC-B can be supplied in a 12-tonne or 16-tonne version.

LB 44 Rotary Drilling Rig expands Liebherr's range of Deep Foundation Machines

At Conexpo Con/Agg 2014 in Las Vegas (USA), Liebherr is displaying its LB 44 rotary drilling rig. This latest development of the company’s deep foundation products expands the LB series at the upper end of the scale. With its many years of experience and extensive know-how in special deep foundation, Liebherr is thus reacting to the need for larger, more powerful machines, taking the toughest demands now placed on rotary drilling rigs into account.

Conexpo Con/Agg 2014: New Generation of Liebherr Midsize and Large Wheel Loaders

Liebherr is presenting its new generation of midsize and large wheel loaders during the 2014 Conexpo Con/Agg show in Las Vegas (USA). Exhibits include an L 542 recycling build, an L 556 standard build and an L 580 Industrial/ forestry build.

New Liebherr Crawler Concrete Pump at the Conexpo Con/Agg 2014

In Las Vegas (USA) the crawler concrete pump THS 110 D-K with a concrete output of 102 m³/h (133 yd³/h) and equipped with a six-cylinder engine, will be unveiled by Liebherr. The series of Liebherr crawler concrete pumps encompasses three different models - the THS 80 D-K, the THS 110 D-K and the THS 140 D-K providing max. concrete outputs of 65 m³/h (85 yd³/h) to 135 m³/h (177 yd³/h).

Large Diameter Bearings by Liebherr for Construction Machinery

Liebherr is a leading global manufacturer and supplier of large diameter bearings and has almost 60 years of experience in the development, design and manufacture of ball bearing slewing rings and roller bearing slewing rings. Large diameter bearings are produced in our facilities located in Biberach an der Riss, Germany and Monterrey, Mexico, in various dimensions and designs in accordance with customer specifications.

Innovative SCRonly concept by Liebherr for Diesel Engines of Tier 4 final: compact modules with high efficiency

Liebherr offers diesel engines to comply with Tier 4 final / stage IV without a diesel oxidation catalyst (DOC), while showing excellent operating values, reasonable costs for exhaust gas aftertreatment and extremely reduced complexity of the engines. Essential for this is the combination of modern combustion engineering, optimized DEF (diesel exhaust fluid) processing and the complete integration of relevant software functions in a new control unit.

Liebherr's LHM 550 boosts scrap handling capacity in Amsterdam

In February 2014 the new LHM 550 for Maja Stuwadoors rolled-off at Port of Amsterdam.

New company Liebherr-Components Kirchdorf GmbH is responsible for hydraulic cylinders within the group of companies

Since the beginning of 2014, Liebherr-Components Kirchdorf GmbH, based in Kirchdorf an der Iller, Germany, has been responsible for hydraulic cylinders within the Liebherr group. The activities in this product sector were previously carried out by Liebherr-Hydraulikbagger GmbH at the same site.

Liebherr-Verzahntechnik with its own sales in China

Since 01.01.2014 the Liebherr-Verzahntechnik GmbH located in Kempten (Germany), is looking after the clients in China in direct sales.

Liebherr Supplies Anti-Buckling Systems to Solaris Bus & Coach S.A.

Liebherr-Transportation Systems has been selected by Solaris Bus & Coach S.A., Owińska (Poland), to supply anti-buckling systems for 18 low-floor tram vehicles, which shall be operated on the tracks of Braunschweiger Verkehrs-AG, Braunschweig (Germany).

Liebherr-Aerospace Singapore Receives DIN EN ISO 14001 Certificate for its Environmental Management System

Liebherr-Aerospace Singapore’s newly established environmental system for the maintenance, repair and overhaul of aircraft components has recently been certified according to DIN EN ISO 14001:2004 by TÜV SÜD PSB Pte. Ltd., Singapore. In the preceding months, the testing body had carried out all necessary audits of the company’s processes and procedures to demonstrate their compliance with the requirements of this worldwide standard.

Six Truck-Mounted Concrete Pumps for the Largest Concrete Pump Operator in Great Britain

Situated in Tamworth, Great Britain, Professional Concrete Pumping Ltd. (PCP) placed an order at the end of January for six Liebherr truck-mounted concrete pumps from Liebherr-Betonpumpen GmbH in Neu-Ulm (Germany). This order represents the single largest customer order placed for Liebherr-Betonpumpen GmbH since their takeover of concrete pump manufacturer Waitzinger in October, 2012.

Liebherr domestic appliances: Facebook page and domestic appliances blog now online

On 26 February 2014, the refrigeration and freezing specialist goes online with a Facebook page and a domestic appliances blog.