Hub-type shaper cutters DIN 3972/II

High-quality shaper cutters from Liebherr are available within a very short time. Their impressive quality makes longer tool life possible. The standard tools are manufactured from ASP2052 / S390 material with an Alcrona Pro coating. The range of stock tools also offers customers great flexibility. Below you will find the available models in the category hub-type shaper cutters DIN 3972/II. The stock tools are available within a short space of time, and include a measurement report.
Module 1.00 - 6.00 mm
Number of teeth 16 - 76
Pressure angle 20 °
Bore d3 19.00 - 44.45 mm


Table is scrollable
Module (mm) Number of teeth d0 (mm) Bore d3 (mm) d1 (mm) b1 (mm) Stock number Inquiries
1.00 76 76.00 31.75 65.00 41.00 W 610 001 02
1.25 61 76.00 31.75 65.00 41.00 W 612 501 02
1.50 34 51.00 19.00 42.00 32.00 W 615 021 02
1.50 51 76.50 31.75 65.00 41.00 W 615 001 02
1.50 68 102.00 44.45 90.00 46.00 W 615 011 02
1.75 43 75.00 31.75 65.00 41.00 W 617 501 02
2.00 26 52.00 19.00 43.00 32.00 W 620 021 02
2.00 38 76.00 31.75 65.00 41.00 W 620 001 02
2.00 50 100.00 44.45 85.00 46.00 W 620 011 02
2.25 34 76.50 31.75 65.00 41.00 W 622 501 02
2.50 22 55.00 19.00 44.00 32.00 W 625 021 02
2.50 32 80.00 31.75 68.00 41.00 W 625 001 02
2.50 40 100.00 44.45 85.00 46.00 W 625 011 02
2.75 28 77.00 31.75 60.00 41.00 W 627 501 02
3.00 20 60.00 19.00 46.00 35.00 W 630 021 02
3.00 25 75.00 31.75 60.00 43.00 W 630 001 02
3.00 33 99.00 44.45 85.00 46.00 W 630 011 02
3.50 22 77.00 31.75 60.00 43.00 W 635 001 02
3.50 29 101.50 44.45 85.00 46.00 W 635 011 02
4.00 19 76.00 31.75 60.00 46.00 W 640 001 02
4.00 25 100.00 44.45 82.00 46.00 W 640 011 02
5.00 16 80.00 31.75 60.00 46.00 W 650 001 02
5.00 20 100.00 44.45 80.00 46.00 W 650 011 02
6.00 17 102.00 44.45 80.00 46.00 W 660 011 02
To the inquiry list