Press releases | 02/07/2019 Between wind turbines and railway bridges – Wiesbauer completes all sorts of projects using a Liebherr crawler crane

The new crawler crane had its first job in the south of Germany no more than 20 kilometres as the crow flies from the company’s head office in Bietigheim-Bissingen involving the removal of a decommissioned steel bridge. As a result of the location of the 100 year old railway bridge in a flora and fauna habitat conservation zone, the crane had to be set up a considerable distance away. The crawler crane had to remove the so-called fish-bellied bridge using a radius of around 60 metres. Fitted with its 96 metre main boom and a derrick boom, the crane moved the decommissioned lattice construction, weighing around 60 tonnes, out of the nature conservation area.

A total of 405 tonnes of ballast, 225 tonnes of which were on the derrick pallet, ensured that the crawler crane had sufficient counterweight. However, before the load could be placed on the ground, the fish-bellied girder, an arch running under the bridge support, had to be removed using flame cutters. Hoisting in and assembling the parts for the temporary bridge was then a matter of professional routine for the team from Wiesbauer.

“Perfect handling, well-planned and practical”

Marco Wilhelm, authorised signatory and project manager at Wiesbauer was also at the site. He planned the job on the old railway bridge in minute detail from setting up the massive site area on a slope to the actual hoist. The later second phase of the job also had to be included in the planning because a new steel bridge weighing 150 tonnes is to be assembled and then hoisted into place in two years time on the large site. This will replace the temporary structure which is currently in position. The complete performance potential of the LR 11000 will be required for this crane job.

The crawler crane could have several hoists like this to complete over the next few years. “We have already had several enquiries”, confirms Wilhelm. “We do not just want to use the crane in wind farms, but we are also trying to attract jobs in industry and on infrastructure projects.” Wilhelm can quote several clear reasons behind the company’s decision to buy a Liebherr LR 11000: “Just from a handling point of view, the crane is perfectly designed, very well planned and practical. And, of course, the performance parameters of this crawler crane class are ideal.”

Crane operator Thomas Kley, who alternated in the cabin of the 1000-tonne crane with his colleague Hans-Günther Zelewski, is delighted with his new machine. After almost three years operating a crawler crane from a rival brand, he says the switch to Liebherr was not a problem at all. “When I arrived in Ehingen for the crane handover, at first I thought that the switch would be difficult,” admits Kley, “but then things went relatively quickly because the crane has a very logical design.” The set-up procedure, crane controller and the whole crane logic system is much easier for the user. “They are worlds apart. Worlds.”