LTM 1070-4.2
Mobile crane
LTM 1070-4.2 - A small 4-axle crane with giant potential.
The LTM 1070-4.2 features the very latest technology – ECOmode and ECOdrive reduce both fuel consumption and noise. The time-tested TELEMATIK single-cylinder telescoping system ensures that the telescopic boom can be extended to the required length easily and automatically. And the active, speed-dependent rear-axle steering enables the crane to drive off-road and makes it highly manoeuvrable. The 4-axle crane can also carried the majority of its ballast on the road. This means that it is immediately ready for use once it reaches the site. So the smallest of our 4-axle cranes is packed full of potential.
Max. load capacity - 70 t
70 t
Telescopic boom - 50 m
50 m
Max. hoist height - 65 m
65 m
Max. radius - 48 m
48 m
Number of axles - 4
4
Photo gallery
Boom/jib combinations
Driving conditions
Ballast systems
Technology
ECOmode
ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The crane control system calculates the perfect engine speed for the diesel engine.
ECOdrive
ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.
Hillstart-Aid
Hillstart-Aid makes starting on gradients easier. Move off safely and easily without rolling backwards.
VarioBase®
VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces.
And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.
Downloads
Technical data
Max. load capacity | 70 t |
at radius | 2.50 m |
Telescopic boom from | 11.00 m |
Telescopic boom up to | 50.00 m |
Lattice jib from | 3.20 m |
Lattice jib up to | 16.00 m |
Drive engine/make | Liebherr |
Drive engine | 6-Zylinder-Diesel |
Drive engine/power | 330 kW |
Number of axles | 4 |
Drive/Steering standard | 8 x 4 x 8 |
Drive/Steering option | 8 x 6 x 8 |
Driving speed | 85.00 km/h |
Total ballast | 14.50 t |