Mobile and crawler cranes
LTM 1060-3.1

Mobile crane

LTM 1060-3.1 - Ideally prepared for any road.

The LTM 1060-3.1 is designed for driving on roads with lots of ballast. A special method of dividing the ballast slabs has been included in the design of this mobile crane. This means that a wide range of driving configurations can be achieved quickly and easily. Its compact dimensions and time-tested ECOmode and ECOdrive make this mobile crane extremely economical to use. In addition to its compact size, the 3-axle crane features a long telescopic boom and impressive lifting capacities.

  • Max. load capacity - 60 t

  • Telescopic boom - 48 m

  • Max. hoist height - 63 m

  • Max. radius - 48 m

  • Number of axles - 3

What's inside

Reaches into the sky:

Hoist heights of up to 63 m are possible with the folding jib attached.

Time-tested technology:

The telescopic boom is extended using the time-tested TELEMATIK single-cylinder telescoping system.

Reduced fuel consumption:

ECOmode and ECOdrive cut fuel consumption by up to 10%.

Superb design:

Various driving configurations can be achieved by dividing the ballast slabs.

Optional VarioBase®:

The prize-winning VarioBase® support system is available as an option to enhance safety.

Photo gallery

Boom/jib combinations

Driving conditions

Ballast systems

Technology

Downloads

Technical data

Max. load capacity
60 t
at radius
2.10 m
Telescopic boom from
10.30 m
Telescopic boom up to
48.00 m
Lattice jib from
2.50 m
Lattice jib up to
16.00 m
Drive engine/make
Liebherr
Drive engine
6-Zylinder-Diesel
Drive engine/power
270 kW
Number of axles
3
Drive/Steering standard
6 x 4 x 6
Drive/Steering option
6 x 6 x 6
Driving speed
85.00 km/h
Total ballast
12.80 t

MyLiebherr

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes