Aggregates

Aggregates

Duty cycle crawler cranes from Liebher are used for a wide variety of applications with a dragline bucket, mostly for the mining of sand and/or gravel. The dragline bucket is more or less cast as required through the swinging of the duty cycle crawler crane.

Service life

Duty cycle crawler cranes must endure especially high dynamic stresses during dragline operation. Their robust steel construction not only increases the performance but also extends the service life making them perfectly suited for material handling operation.

Dragline control

The Interlock control system allows for power regeneration in dragline operation. This reduces the fuel consumption as well as the wear of the free-fall winch.

Transportation

Special attention was given to the uncomplicated and economic transportation on all roads in accordance with current international transport regulations. Thanks to minimum set-up work the machine can be quickly mobilized between jobsites so promoting economic deployment.

Results 1–5 of 5

HS 8040.1

Duty cycle crawler crane

Max. lifting capacity - 40 t
40 t
Engine power - 230 kW
230 kW
Max. winch line pull - 2 x 120 kN
2 x 120 kN
Max. main boom - 41.00 m
41.00 m

Availability - See countries

HS 8200

Duty cycle crawler crane

Max. lifting capacity - 200 t
200 t
Engine power - 750 kW
750 kW
Max. winch line pull - 2 x 350 kN
2 x 350 kN
Max. main boom - 68.00 m
68.00 m

Availability - See countries

HS 8100.2

Duty cycle crawler crane

Max. lifting capacity - 100 t
100 t
Engine power - 450 kW
450 kW
Max. winch line pull - 2 x 295 kN
2 x 295 kN
Max. main boom - 59.00 m
59.00 m

Availability - See countries

HS 8070.1

Duty cycle crawler crane (HS series)

Max. lifting capacity - 70 t
70 t
Engine power - 320 kW
320 kW
Max. winch line pull - 2 x 200 kN
2 x 200 kN
Max. main boom - 50.00 m
50.00 m

Availability - See countries

HS 8130.1

Duty cycle crawler crane

Max. lifting capacity - 130 t
130 t
Engine power - 565 kW
565 kW
Max. winch line pull - 2 x 350 kN
2 x 350 kN
Max. main boom - 53.00 m
53.00 m

Availability - See countries

5.5 million tonnes for the Hungarian motorway system

For about one year, two duty cycle crawler cranes, type HS 8070, worked twenty-four hours, seven days a week. Each machine was equipped with a 23 m long boom as well as a dragline bucket with a filling capacity of 3 m³.

Every day about 16,000 t of sand and gravel were extracted from depths of down to 12 m. That means a turnover of approximately 330 t per hour and machine. The average diesel consumption was only 24-26 litres per hour.

01/03

Grab operation

Thanks to their robust design and the high line pull of the main winches, duty cycle crawler cranes from Liebherr are ideal for jobs using heavy grabs.
During operation with material handling grabs, the stabilizing winch with constant tension and free-fall prevents swinging of the grab and ensures exact positioning of the material.

Sand quarrying

The HS 895 HD - duty cycle machine with two 350 kN winches - is handling 400 t of sand per hour. With a swing angle of approx. 180° it requires only 45 seconds per cycle. The digging depth has been increased to 40 m. The grab, with a filling capacity of 5 m³, can optimally penetrate very hard soils or interlocked material thanks to the specifically rounded shape and the grab teeth.

Get in touch

If you have any further questions, please contact our local sales or service team.

Our competences

Customer service

The continuous improvement and expansion of the service network is part of Liebherr’s commitment to offer the best possible support to customers worldwide.

Jobsite consulting

Practical advice from professionals for professionals: The aim of the application specialist on site is to improve machine handling and to optimize the working processes for the customer.

5.5 million tonnes for the Hungarian motorway system

24/7

HS 8130 with dragline bucket

Grab operation

Sand quarrying

Get in touch

Our competences

Customer service

Jobsite consulting