News and press releases

ESEASA expands fleet for projects throughout Mexico

The Mexican heavy lifting company ESEASA has taken delivery of five new Liebherr mobile cranes – including two LTM 1650-8.1, two LTM 1400-6.1 and one LTM 1250-5.1. The machines will be used in the wind industry, in the oil and gas sector and on road and infrastructure projects throughout Mexico.

5 facts about the LR 1300.2 SX unplugged crawler crane that you didn't know yet

Under the motto ‘Hands on the future’, Liebherr will be showcasing solutions for the construction sites of the future at Bauma 2025. Discover over 70 exhibits and a variety of individual solutions at Liebherr’s 14,000 m2 booth – including the crawler crane LR 1300.2 SX unplugged. Here are five exciting facts about this extraordinary exhibit.

An LTM 1650-8.1 goes to Glasgow

Scottish lifting and transport service provider Leggat Plant Ltd, part of the Mellex Group Ltd, is expanding its fleet with an LTM 1650-8.1.

Liebherr shamrock – three cranes for Ireland

Quigley Crane Services Ltd. has ordered three Liebherr mobile cranes at Bauma 2025: With one new LTM 1300-6.4, LTM 1150-5.4 and LTM 1120-4.2 each, the Northern Irish crane hire company now has a total of seven cranes currently in their fleet.

Make four out of two – Phoenix Crane Service orders MK cranes

The positive experience with the MK 88-4.1 and the MK 140-5.1 speaks for itself: Phoenix Crane Service ordered two more Liebherr mobile construction cranes of the same type at Bauma. “The MK cranes are innovative; they provide new solutions and service a wide range of applications. We are excited to add two more MK cranes to our fleet,” says Michael Knott, President/CEO at Phoenix Crane Service.

Bigge orders over 25 Liebherr cranes

Bauma 2025 started: Official tour of the trade fair visits Liebherr stand

The weather was good and the mood was even better. The official fair tour of Messe München also marked the beginning of the Bauma week on the Liebherr booth.

Press kit: Bauma 2025

All press releases Liebherr has published for Bauma 2025 in Munich (Germany).

Bauma 2025: Liebherr demonstrates the future of construction and mining with ‘Hands on the future’

At Bauma 2025 in Munich, Liebherr is presenting itself as a pioneer and technology leader in many industries. Guided by the motto ‘Hands on the future’, the Group is presenting future-oriented exhibits, technological innovations and practical solution concepts for increased efficiency, safety and environmental compatibility – for the construction and mining industry of the future.

Game of Cranes: Liebherr is looking for the world’s best mobile crane driver

Which company employs the best mobile crane driver? The crane manufacturer from Ehingen (Germany) is inviting its customers’ crane drivers to take part in the international “Game of Cranes” competition.

Systematic maintenance: Liebherr presents concept for the Digital Service Booklet

Liebherr-Werk Ehingen GmbH is presenting its concept for the Digital Service Booklet at Bauma 2025. The tool simplifies the maintenance and servicing of mobile cranes and provides both service technicians and crane operators with a user-friendly platform for managing service and maintenance information. This means that all information about the life cycle of a mobile crane can be collected online in one place and viewed at any time.

It's a matter of control: Liebherr presents LTM 1150-5.4, another mobile crane with new LICCON3 control system

Liebherr is pushing ahead with the modernisation of the crane technology and is presenting the latest generation of the 150-tonne crane, the LTM 1150-5.4. As part of the introduction of the new LICCON3 control system, the tried-and-tested LTM 1150-5.3 has been further developed. The 5-axle crane now shines not only with state-of-the-art technology, but also with the trend-setting crane design of the new series. In addition, the LTM 1150-5.4 is equipped with new driver assistance systems to increase driving safety on the road. Visitors can experience the result live: The LTM 1150-5.4 can be seen on the Liebherr stand at Bauma in Munich.

"Zero emissions, full power": Liebherr LTM 1150-5.4E mobile crane with electric drive

At Bauma 2025, Liebherr is presenting the LTM 1150-5.4, which has been converted to the new LICCON3 control system generation. A particular highlight is the LTM 1150-5.4E variant with electric drive, which allows the crane movements to be performed emissions-free and with reduced noise pollution. With an integrated battery, the crane can work autonomously for up to four hours without a power connection, and a low connected load on the construction site is sufficient to utilise the crane's full power, as the battery acts as an efficient buffer. The LTM 1150-5.4E meets the requirements of "Zero Emissions Construction Sites" and combines sustainability with maximum efficiency.

Less weight for heavy lifting: Liebherr LTM 1055-3.3 mobile crane takes mobility to a new level

Liebherr presents the lightest 3-axle all-terrain crane on the market at Bauma. The LTM 1055-3.3 redefines mobility, because complex and restrictive driving permits are a thing of the past. Low axle loads and gross vehicle weights enable comprehensive long-term driving permits on a large number of markets worldwide. Despite the lightweight design of the new 55-tonne crane, it offers high lifting capacities with its 40-metre telescopic boom, especially for medium and large radii.

Mobile and crawler cranes from Liebherr: digital in operation, digital at Bauma

From lift planning and crane operator training to maintenance, Liebherr-Werk Ehingen GmbH will be presenting its digital solutions for crane operation at Bauma 2025: visitors to the trade fair can find out about new products and updates both in the outdoor area in the mobile and crawler crane section and in the “Digital Technologies & Services” indoor area opposite.

Liebherr Connect – connecting man, machine and environment

With Liebherr Connect, the Group is taking a further step in the digital networking of machines. Efficient data exchange represents major added value for customers and partners. Liebherr Connect is the key to digitalisation – today and in the future.

Advance into the next class: Schlamann strengthens its position with Liebherr LTM 1300-6.3

Schlamann-Autokrane GmbH has taken delivery of a new Liebherr LTM 1300-6.3. With the new crane, the North German crane company based in Nienburg is entering the 6-axle mobile crane class. At 90 metres, the LTM 1300-6.3 has a very long telescopic boom, which is predestined for applications in the field of infrastructure expansion, such as the installation of electricity pylons. The long-standing partnership with Liebherr was another important criterion in the purchase decision.

9 must-see giants at Liebherr’s booth at Bauma

Discover over 70 exhibits and a variety of individual solutions at Liebherr’s 14,000 m2 booth at Bauma – including these nine giants that you absolutely must see.