LTM 1150-5.4

Mobile crane

LTM 1150-5.4 – The jewel in your fleet.

The LTM 1150-5.4 is the latest generation of our successful 150-tonne crane. The tried-and-tested LTM 1150-5.3 has been further developed with our new LICCON3 crane control system. The 5-axle crane now not only shines with state-of-the-art technology, but also with the typical LICCON3, trend-setting crane design. In addition, the all-terrain crane now has numerous new driver assistance systems to increase driving safety on the road.

LICCON3

Compare

Max. load capacity - 150 t
150 t
Telescopic boom - 66 m
66 m
Max. hoist height - 92 m
92 m
Max. radius - 72.0 m
72.0 m
Number of axles - 5
5

LICCON3

Compare

LICCON3:

The third generation of the LICCON control system takes the familiar crane control to a new level and features some impressive new technologies.

Economical design:

Carrying a large part of its ballast means there is often no need for an additional transport vehicle.

Makes a great deal possible:

Many jobs can be completed quickly without any additional equipment thanks to its long boom and the ballast it carries.

Off-road assistance:

Hillstart-Aid helps starting on a gradient – consigning rolling backwards to history.

Efficient:

ECOmode and ECOdrive reduce fuel consumption by up to 10%.

Hook block can be ballasted:

Weighted plates on both sides of the hook block enable the weight of the block to be adjusted perfectly to the situation.

Photo gallery

Technical data

Max. load capacity	150 t
at radius	3.00 m
Telescopic boom from	12.30 m
Telescopic boom up to	66.00 m
Lattice jib from	2.90 m
Lattice jib up to	26.00 m
Drive engine/make	Liebherr
Drive engine	6-cylinder Diesel
Drive engine/power	400 kW
Number of axles	5
Drive/Steering standard	10 x 6 x 10
Drive/Steering option	10 x 8 x 10
Driving speed	85.00 km/h
Total ballast	45.00 t

Downloads

Technical Data - Mobile crane LTM 1150-5.4 [m/t]

Boom/jib combinations

Driving conditions

On-road driving

Jobsite driving

Ballast systems

Counterweight

Technology

Single-engine concept

Take one engine out to increase lifting capacity. Or more accurately – the superstructure is powered by the undercarriage engine. Gear shafts are routed from the distributor gear in the substructure via two mitre gears to the pump distributor gear in the superstructure. That enables us to remove one engine – and we use this to increase the crane’s lifting capacity.

Hillstart-Aid

Hillstart-Aid makes starting on gradients easier. Move off safely and easily without rolling backwards.

RemoteDrive

The RemoteDrive remote control enables the crane to be controlled from outside the driver’s cabin. This is not only possible during crane operations, but also whilst driving on the site. This delivers greater safety and comfort as the crane operator has a better view of problem areas as he can be right next to them. In other words, the operator can move himself to the areas with difficult access.

LICCON3

The third generation LICCON control system features the same time-tested operation as previous generations and adds a fast data bus, significantly more storage space and greater computing power. LICCON3 cranes are prepared for telematics and fleet management.

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

AutoBallast

The AutoBallast function completes the ballasting process automatically. All the steps are carried out after the button has been pressed just once.

MyLiebherr

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes

MyLiebherr

LTM 1150-5.4

Mobile crane

LTM 1150-5.4 – The jewel in your fleet.

Photo gallery

Technical data

Downloads

Boom/jib combinations

Boom/jib combinations

Driving conditions

On-road driving

Jobsite driving

Ballast systems

Counterweight

Technology

Single-engine concept

Hillstart-Aid

RemoteDrive

LICCON3

VarioBase®

AutoBallast

WindSpeed load charts

Driver assistance systems

MyLiebherr

LTM 1150-5.4