LTM 1090-4.3

Mobile crane

LTM 1090-4.3 - All-rounder - Ready for anything.

With the new LICCON3 control system, the tried-and-tested LTM 1090-4.2 becomes the LTM 1090-4.3. The powerful 90-tonne (110 USt) model combines modern design, mobility and cost-effectiveness. Clear displays enable intuitive operation, while assistance systems ensure a high level of driving safety on the road. Thanks to flexible axle load configurations, the 4-axle vehicle can be used economically worldwide. VarioBallast® and VarioBase® provide additional power and flexibility as standard. And best of all - the LTM 1090-4.3 offers even higher lifting capacities on the long 60 m (197 ft) telescopic boom compared to its predecessor!

HVO fuel

Compare

Max. load capacity - 90 t
90 t
Telescopic boom - 60 m
60 m
Max. hoist height - 76 m
76 m
Max. radius - 62.0 m
62.0 m
Number of axles - 4
4

HVO fuel

Compare

What's inside

LICCON3:

The third generation of the LICCON control system takes the familiar crane control to a new level and features some impressive new technologies.

Cost-effective mobility worldwide:

By removing the ballast, axle loads of less than 10 tonnes can be achieved.

Lower fuel consumption and noise:

ECOmode and ECOdrive reduce fuel consumption and ensure low noise in action.

Variable support:

The VarioBase® support technology enables maximum load-bearing capacities as a standard feature.

VarioBallast®:

The adjustable ballast system delivers greater flexibility in action.

Photo gallery

Technical data

Max. load capacity	90 t
at radius	3.00 m
Telescopic boom from	11.40 m
Telescopic boom up to	60.00 m
Lattice jib from	2.00 m
Lattice jib up to	16.00 m
Drive engine/make	Liebherr
Drive engine	6-cylinder Diesel
Drive engine/power	330 kW
Number of axles	4
Drive/Steering standard	8 x 6 x 8
Driving speed	85.00 km/h
Total ballast	22.50 t

Downloads

Technical Data - Mobile crane LTM 1090-4.3 [m/t]

Boom/jib combinations

Driving conditions

On-road driving

Jobsite driving

Ballast systems

Counterweight

VarioBallast: Counterweight radius

Technology

Hillstart-Aid

Hillstart-Aid makes starting on gradients easier. Move off safely and easily without rolling backwards.

RemoteDrive

The RemoteDrive remote control enables the crane to be controlled from outside the driver’s cabin. This is not only possible during crane operations, but also whilst driving on the site. This delivers greater safety and comfort as the crane operator has a better view of problem areas as he can be right next to them. In other words, the operator can move himself to the areas with difficult access.

LICCON3

The third generation LICCON control system features the same time-tested operation as previous generations and adds a fast data bus, significantly more storage space and greater computing power. LICCON3 cranes are prepared for telematics and fleet management.

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

VarioBallast® (mechanical)

Mechanically slewing ballasting cylinders enable the ballast radius to be changed quickly to two different settings. The smaller radius is used in constricted conditions whilst the larger one is used if a higher lifting capacity is required. This significantly increases the crane’s flexibility.

AutoBallast

The AutoBallast function completes the ballasting process automatically. All the steps are carried out after the button has been pressed just once.

MyLiebherr

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes

MyLiebherr

LTM 1090-4.3

Mobile crane

LTM 1090-4.3 - All-rounder - Ready for anything.

What's inside

Photo gallery

Technical data

Downloads

Boom/jib combinations

Boom/jib combinations

Driving conditions

On-road driving

Jobsite driving

Ballast systems

Counterweight

VarioBallast: Counterweight radius

Technology

Hillstart-Aid

RemoteDrive

LICCON3

VarioBase®

VarioBallast® (mechanical)

AutoBallast

WindSpeed load charts

Driver assistance systems

MyLiebherr

LTM 1090-4.3