LGG 300 - 500 / 700 M

多面手。

机床长度 3,500 mm
机床宽度 2,700 mm
机床高度 4,000 mm
工件直径 300 - 700 mm
轴向行驶 1,000 mm
轮班行驶 230 - 350 mm
工作台上方的最小位置 60 mm
磨削头摆动角 45 ° Grad
工件转速 1,000 min-1

  • 灵活性

  • 技术多样性

  • 性能强劲

外磨削头和内磨削头

LGG 提供工艺优化的外磨削头和内圆磨臂。两个外磨削头(GH 320 和 GH 240 CB)均使用主轴内部平衡系统。在 GH 320 CB 中,平衡系统集成在芯棒中。

高驱动功率和转速是巨大的优势,例如在使用新型磨料时。由于采用先进的刀具夹紧方式,可以简单快速地更换磨削芯轴。

对于容易发生碰撞的工件和需要进行特殊齿轮校正的情况,可以使用小型磨削刀具来进行加工。

使用 GH 320 CB 磨削头,现在还可以高效、高质量地磨削模数高达 14 mm 的工件。

更换快速简便

适配性强的内磨削头可轻松快速地安装在外磨削头上,并由主驱动装置驱动。可根据要求提供其他磨削头。

从外磨削到内磨削仅需 30 分钟

15 分钟。

拆下用于外磨削的蜗杆磨和冷却润滑剂喷嘴,并挂上内圆磨臂

20 分钟。

连接冷却润滑剂、密封气体和电源,并将传动皮带连接到主轴

25 分钟。

安装内圆磨盘(CBN 或刚玉)

30 分钟。

启动程序调用内磨削

We need your consent This video is provided by Google*. When you load this video, your data, including your IP address, is transmitted to Google, and may be stored and processed by Google, also for its own purposes, outside the EU or the EEA and thus in a third country, in particular in the USA**. We have no influence on further data processing by Google. By clicking on “ACCEPT”, you consent to the data transmission to Google for this video pursuant to Art. 6 para. 1 point a GDPR. If you do not want to consent to each YouTube video individually in the future and want to be able to load them without this blocker, you can also select “Always accept YouTube videos” and thus also consent to the respectively associated data transmissions to Google for all other YouTube videos that you will access on our website in the future. You can withdraw given consents at any time with effect for the future and thus prevent the further transmission of your data by deselecting the respective service under “Miscellaneous services (optional)” in the settings later also accessible via the “Privacy Settings” in the footer of our website). For further information, please refer to Data Protection Declaration and the Google Privacy Policy. * Google Ireland Limited, Gordon House, Barrow Street, Dublin 4, Ireland; parent company: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA
** Note: The data transfer to the USA associated with the data transmission to Google takes place on the basis of the European Commission’s adequacy decision of 10 July 2023 (EU-U.S. Data Privacy Framework).

视频 展成磨行星齿轮,模数 14,在兼具成型磨齿功能的展成磨齿机 LGG 500 上

使用小型刀具展成磨

集成的离心分离装置

自动化系统

手动上料或借助 NC 升降工位机器人

用于手动上料或借助机器人上料的上料舱门 NC 升降工位

塑料链带 (KKB)

配备塑料链带的外置自动化系统

技术数据
机床长度 3,500 mm
机床宽度 2,700 mm
机床高度 4,000 mm
轴向行驶 1,000 mm
工作台上方的最小位置 60 mm
磨削头摆动角 45 ° Grad
工件转速 1,000 min-1
LGG 300 LGG 380 LGG 500 LGG 700 M
工件直径 [mm] 300 380 500 700
Variants

了解 Liebherr-Verzahntechnik GmbH 的更多产品: