ニュース＆プレスリリース

Visionary boom system from Liebherr - SX system increases lifting capacity and lifting height of 750-tonne lattice boom cranes to the 1,000 tonne class for erecting wind turbines

Liebherr has developed a completely new boom system with the designation SX for its 750-tonne lattice boom cranes LR 1750/2 and LG 1750 for erecting the latest generation of wind turbines. Turbines with a hub height of up to 165 metres and component weights of up to 120 tonnes can be erected using the SX system. To date these capacity data were the exclusive domain of cranes in the 1000 tonne class or above.

World Premier: First Ever 3D Printed Primary Flight Control Component from Liebherr-Aerospace Has Flown on an Airbus Aircraft

On March 30th 2017, Airbus successfully flew Liebherr-Aerospace’s 3D printed spoiler actuator valve block on a flight test A380.

Liebherr at the Ligna 2017 trade fair with special machines for the timber and forestry industry

At the Ligna 2017 international trade fair for the timber and forestry industry, which takes place from 22 to 26 May 2017 in Hanover, Liebherr is presenting its latest special machines for timber processing companies. Visitors can find the Liebherr trade fair stand in the Open-air site (FG) on the corner of 7th avenue and Logistics avenue, Stand L44.

Liebherr to Supply Roll Coupling Components for Combino Low-Floor Trams in Potsdam

Liebherr-Transportation Systems has received an order from Siemens AG, Vienna (Austria) to supply roll coupling components for eight Combino low-floor trams. The trams will be operated by Verkehrsbetriebe Potsdam GmbH, Potsdam (Germany). The order comprises a total of 48 control cylinders, 24 hydraulic accumulators and 24 stop valves, and will be delivered by the end of 2017.

Brazilian crane contractor LOCAR updates its crane fleet with 4 new Liebherr LTM 1250-5.1 mobile cranes

Crane, heavy haulage and aerial platform contractor LOCAR from Brazil took delivery of four new Liebherr LTM 1250-5.1 mobile cranes at a stroke. New technical developments such as VarioBase®, VarioBallast® and the single-engine concept were important criteria for the purchase. LOCAR has updated its crane fleet with these four new 250-tonne cranes.

Liebherr crawler excavator R 926 in action during coastal repair work on the island of Texel

A new Liebherr R 926 crawler excavator has been deployed on the Dutch island of Texel since September 2016. The excavator is used by Dros during coastal repair work, for building dams and canals, as well as for pumping applications.

World Premier: First Ever 3D Printed Primary Flight Control Component from Liebherr-Aerospace Flown on an Airbus Aircraft

On March 30th 2017, Airbus successfully flew Liebherr-Aerospace’s 3D printed spoiler actuator valve block on a flight test A380. It is the first 3D printed primary flight control hydraulic component flown on an Airbus aircraft.

Milestone anniversary: Liebherr-Werk Bischofshofen GmbH delivers 50,000th wheel loader

The 50,000th Liebherr wheel loader has rolled off the production line at Liebherr-Werk Bischofshofen GmbH. The anniversary machine, an L 566 XPower®, will be delivered to long-standing Liebherr customer Geiger Unternehmensgruppe. Geiger‘s Managing Partner Pius Geiger and Geiger Logistik’s Managing Director Gernot Beer travelled to Bischofshofen to pick up the anniversary wheel loader in person.

Liebherr planning new development and demonstration centre in Kirchdorf

Liebherr-Hydraulikbagger GmbH will invest over 30 million Euro in a new development and demonstration centre at the site in Kirchdorf over the next five years. Construction work is due to start in 2017 and is expected to be completed by 2021.

Liebherr planning new development and demonstration centre in Kirchdorf

Liebherr-Hydraulikbagger GmbH will invest over 30 million Euro in a new development and demonstration centre at the site in Kirchdorf over the next five years. Construction work is due to start in 2017 and is expected to be completed by 2021.

Liebherr Tower Cranes – everything from planning to dismantling from a single source

The Liebherr Tower Cranes Division planned and completed a job for a 1000 EC-H 50 Litronic in Schelklingen down to the very last detail. A new klinker production line is currently being built there whilst the cement works continues to operate normally.

Liebherr-Aerospace receives Silver Award from COMAC

On March 21st, 2017, COMAC honored Liebherr-Aerospace with the Silver Award for its performance in 2016.

Gulf Haulage Heavy Lift Company erects the first wind turbine in Saudi Arabia using a Liebherr LR 1750 crawler crane

Heavy haulage and heavy lift contractor Gulf Haulage Heavy Lift Company (GHHL) has erected the first wind turbine in Saudi Arabia. A Liebherr LR 1750 crawler crane was used to erect the 84 metre tower, the 83 tonne nacelle and the 60 metre blades. The wind turbine in Turaif in the north-east of Saudi Arabia will generate power for a bulk plant facility operated by state oil company Saudi Aramco.

Liebherr to supply active yaw damper systems for Vectron locomotives

Liebherr-Transportation Systems will supply active yaw damper systems to Siemens for installation in the bogies of Vectron locomotives.

First Liebherr R 922 crawler excavator for low regulated markets operating in China

At bauma 2016 in Munich, Liebherr presented its new model series of the crawler excavators R 920, R 922 and R 924 for the first time. Meeting the requirements of customers from low regulated markets, these machines are specifically based on tried-and-tested European standards. A new R 922 built by Liebherr Machinery (Dalian) Co. Ltd has been working for the Xi’an Tianyi Earth-moving Co. Ltd since August 2016. This excavator is one of the first machines from the new model series operating in China.

Mamut de Colombia building a new metro line in Panama City using several Liebherr mobile cranes

Colombian crane contractor Mamut de Colombia is currently working on the construction of metro line 2 in Panama City. This involves two Liebherr LTM 1500-8.1 mobile cranes and a Liebherr LTM 1400-7.1 crane hoisting a total of 1640 U-shaped concrete beams weighing up to 161 tonnes onto prefabricated pillars by the end of 2018.

New diesel engines: Liebherr is introducing two 6-cylinder in-line engines with displacements of 12 and 13.5 litres

Conexpo saw Liebherr showcase two new 6-cylinder in-line engines, which will be strengthening the portfolio in 2019. The D956 and D966 share nearly identical dimensions, and cover a wide power range from 320 to 450 kW, with displacements of 12 and 13.5 litres, respectively.

Liebherr and African Mining Services celebrate 20 years of successful partnership

At MINExpo 2016, Liebherr took the opportunity to offer a symbolic gift to their client African Mining Services (AMS) as a sign of a successful 20-year collaboration.