You are hereLiebherr Group: Products & Services for United States of America (en)
For wet soil mixing the mixing tools rotate around the vertical axis of the mixing shaft. The tools break up the soil matrix and mix the suspension with the soil. The binding agents used are usually cement types mixed to a suspension by adding water.
1. Positioning of mixing tool
2. Inserting the mixing tool under addition of binding agents
3. Mixing of the soil down to final depth
4. Rotary extraction of the mixing tool under addition of binding agents
5. Setting of the soil/binding agent mixture
For wet soil mixing the individual soil-mix elements are often executed in specific grid patterns, such as for stabilisation columns under shallow foundations in road construction.
The mixing drives for uncased wet mixing can be modularly combined with each other. Very frequently multiple mixing tools are used. Thus, panel shaped reinforced ground structures are produced.
The mixing tool consists of a hollow drilling linkage fitted with blades, knives or paddles at its lower end.
The binding agent suspension is pressed into the soil through nozzles situated in the lower area of the mixing tool.
The soil is further mixed during extraction of the mixing tool and further binding agent is injected.
An LRB 125 in wet mixing application with triple mixing equipment and longitudinal mounting.
LRB 125 with double mixing equipment in longitudinal mounting for cut-off wall installation.
The video shows the production of soil mixing elements using the wet soil mixing process.
27,500 m² of soil was improvement for a residential area with 200 units.
This product is not available in the selected range. Change the range to delete the product separately from your wish list.