LTM 1150-5.3 - The jewel for any fleet.

  • Lots on board:

    The crane can carry 9 t of ballast with an axle load of 12 t.

  • Economical design:

    Carrying a large part of its ballast means there is often no need for an additional transport vehicle.

  • Makes a great deal possible:

    Many jobs can be completed quickly without any additional equipment thanks to its long boom and the ballast it carries.

  • Off-road assistance:

    Hill Start Aid helps starting on a gradient – consigning rolling backwards to history.

  • Efficient:

    ECOmode and ECOdrive reduce fuel consumption by up to 10%.

  • Hook block can be ballasted:

    Weighted plates on both sides of the hook block enable the weight of the block to be adjusted perfectly to the situation.

LTM 1150-5.3

With a maximum lifting capacity of 150 tonnes and a long telescopic boom, the LTM 1150-5.3 is the perfect addition to Liebherr’s crane range below the LTM 1160-5.2. With an axle load of twelve tonnes, the crane can carry nine tonnes of ballast on public roads. This ballast enables it to complete lots of jobs without requiring an additional vehicle to transport the ballast. Its powerful telescopic boom can be extended with lots of add-on jibs. These are compatible with many of our cranes with lifting capacities between 100 and 180 tonnes. We have continued our single-engine strategy on this crane with a mechanical drive unit for the superstructure. The weight reduction created by the elimination of the superstructure engine is used to deliver a longer boom and more lifting capacity.

Max. load capacity 150 t
Telescopic boom 66 m
Max. hoist height 92 m
Max. radius 72 m
Number of axles 5

Technical data

Max. load capacity 150 t
at radius 3.00 m
Telescopic boom from 12.30 m
Telescopic boom up to 66.00 m
Lattice jib from 2.9 m
Lattice jib up to 26.0 m
Drive engine/make Liebherr
Drive engine 6-Zylinder-Diesel
Drive engine/power 400 kW
Number of axles 5
Drive/Steering standard 10 x 6 x 10
Drive/Steering option 10 x 8 x 10
Driving speed 85.00 km/h
Total ballast 45.00 t

Downloads

Ballast systems

Counterweight [t]

Counterweight [lb]

Boom/jib combinations

Boom/jib combinations

Driving conditions

On-road driving [t]

On-road driving [lb]

Jobsite driving [t]

Jobsite driving [lb]

Technology

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

ECOdrive

ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The LICCON 2 control system calculates the perfect engine speed for the diesel engine.

WindSpeed load charts

Increased flexibility and safety by using lifting capacity tables with different maximum wind speeds.

Hillstart-Aid

Hillstart Aid makes starting on gradients easier. Move off safely and easily without rolling backwards.

Liebherr unveils a jewel for any fleet with the LTM 1150-5.3:

After manufacturing around 1500 units, Liebherr has finally unveiled the successor to its successful LTM 1130-5.1 – the LTM 1150-5.3. With an axle load of twelve tonnes, the crane can carry nine tonnes of ballast on public roads. Find out more