Shank-type shaper cutters DIN 5480 Shank-type shaper cutters

High-quality stock tools from Liebherr are available within a very short time. Their impressive quality makes longer tool life possible. The standard tools are manufactured from ASP2052 / S390 material with an Alcrona Pro coating. The range of stock tools also offers customers great flexibility. Below you will find the available models in the category shank-type shaper cutters DIN 3972/II. The stock tools are available within a short space of time, and include a measurement report. MK2 = Morse taper 2, l2=40 mm, d5=M6 MK 4 = Morse taper 4, l2=71 mm, d5=M16, z2 = Number of teeth on workpiece.
Module 0.60 - 5.00 mm
Number of teeth 10 - 16
Pressure angle 30 °
Taper MK1 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK4 / MK2 / MK4 / MK2 / MK4 / MK4 / MK4 / MK2 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4
length I0 70.00 - 200.00 mm


Table is scrollable
Module (mm) Number of teeth d0 (mm) Taper z2min length I0 (mm) Stock number Inquiries
0.60 16 10.00 MK1 23 70.00 W 506 051 02
0.80 16 13.00 MK2 23 85.00 W 508 051 02
1.00 10 10.00 MK2 16 85.00 W 510 051 02
1.00 16 16.00 MK2 23 100.00 W 510 061 02
1.25 10 12.50 MK2 16 85.00 W 512 551 02
1.25 16 20.00 MK2 23 100.00 W 512 561 02
1.50 10 15.00 MK2 16 100.00 W 515 051 02
1.50 16 24.00 MK4 23 150.00 W 515 061 02
1.75 10 17.50 MK2 16 100.00 W 517 551 02
1.75 16 28.00 MK4 23 150.00 W 517 561 02
2.00 10 20.00 MK2 16 100.00 W 520 051 02
2.00 10 20.00 MK4 16 180.00 W 520 081 02
2.00 16 32.00 MK4 23 150.00 W 520 061 02
2.00 16 32.00 MK4 23 180.00 W 520 071 02
2.50 10 25.00 MK2 16 100.00 W 525 051 02
2.50 16 40.00 MK4 23 150.00 W 525 061 02
3.00 10 30.00 MK4 16 150.00 W 530 051 02
3.00 10 30.00 MK4 16 200.00 W 530 071 02
3.00 16 48.00 MK4 23 150.00 W 530 061 02
3.00 16 48.00 MK4 23 200.00 W 530 081 02
4.00 12 48.00 MK4 18 150.00 W 540 051 02
4.00 12 48.00 MK4 18 200.00 W 540 061 02
5.00 12 60.00 MK4 18 150.00 W 550 051 02
To the inquiry list