Compact crane LTC 1050-3.1E

LTC 1050-3.1E

Compact crane

LTC 1050-3.1E - Zero emissions, full power.

The accelerating climate revolution demands drive concepts which reduce emissions of greenhouse gases. That is why our new LTC 1050-3.1 compact crane has an electric motor in addition to its conventional power unit. This enables crane movements to be powered electrically as an option. The new version of the compact 50 tonne crane therefore helps to reduce CO2 emissions and meets the requirements for operating on “zero emissions” sites. The LTC crane takes the electricity for crane operations direct from the site. The compact crane retains all its familiar properties regardless of whether it is powered by the electric motor or the internal combustion engine. If the power supply is sufficient, its performance in electrical mode is comparable with when it is powered by the engine. If the power supply is lower, the performance of the crane is reduced accordingly.

HVO fuel

Compare

Max. load capacity - 50 t
50 t
Max. hoist height - 48 m
48 m
Max. radius - 39 m
39 m
Number of axles - 3
3

HVO fuel

Compare

What's inside

Zero emissions:

Zero CO2 emissions when crane operations are powered by the electric motor.

Full power:

Comparable performance during crane operations, regardless of whether it is powered by the electric motor or internal combustion engine.

Simply quiet:

Noise emissions during crane operations powered by the electric motor are significantly reduced.

Supplied from the site:

Full performance with a 125 amp power supply, reduced performance with 32 A / 63 A.

Supplied by stored power:

Conventional external battery packs can also be used.

It couldn’t be simpler:

Maximum flexibility by quick changing between diesel-hydraulic and electro-hydraulic power at the touch of a switch.

Photo gallery

Technical data

Max. load capacity	50 t
at radius	3.00 m
Telescopic boom from	8.10 m
Telescopic boom up to	36.00 m
Lattice jib from	1.50 m
Lattice jib up to	13.00 m
Drive engine/make	Cummins
Drive engine	6-Zylinder-Diesel
Drive engine/power	243 kW
Crane engine/power	72 kW
Number of axles	3
Drive/Steering standard	6 x 4 x 6
Drive/Steering option	6 x 6 x 6
Driving speed	85.00 km/h
Total ballast	6.50 t

Downloads

Technical Data - Compact crane LTC 1050-3.1E [m/t]

PDF (3.1 MB)

Videos

LTC 1050-3.1E - Zero emission, full power

Boom/jib combinations

Technology

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The crane control system calculates the perfect engine speed for the diesel engine.

ECOdrive

ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.

RemoteDrive

The RemoteDrive remote control enables the crane to be controlled from outside the driver’s cabin. This is not only possible during crane operations, but also whilst driving on the site. This delivers greater safety and comfort as the crane operator has a better view of problem areas as he can be right next to them. In other words, the operator can move himself to the areas with difficult access.

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

Lift cabin

The crane cabin on this crane can be telescoped into the air with infinite adjustment. The better view from above of the load and working environment significantly increases safety during crane operations – and driver comfort is also massively enhanced.

HVO ready

Up to 90 % lower CO2 emissions in action.

MyLiebherr

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes

MyLiebherr