Components

LPI

Hydrogen injector for port fuel injection

The Liebherr LPI injector for port fuel injection is designed for stable injection quantities and a uniform quantity plateau. This enables it to support precise control of the hydrogen flow. The design is engineered for reliable sealing and high flow rates. The injector can be configured for various engine sizes and power ranges. Its suitability for the respective application must be assessed on the basis of the technical requirements and test results.

  • Pressure - 2 - 15 bar

  • Injector configuration - side feed / top feed

  • Flow rate - 12 g/s at 15 bar

Highlights

Designed to run dry without additional lube oil
Dedicated gas-tight valve concept
Available as a single component or system solution
Common platform concept for PFI & DI

Photo gallery

Technical data

Pressure
2 - 15 bar
Injector configuration
side feed / top feed
Weight
0.350 kg
Flow rate
12 g/s at 15 bar
Min. quantity capability
2 mg/stroke
Hydrogen fuel temperature
-40 to 120 °C
Max. power per engine cylinder
65 kW/cyl.

Downloads

Discover now

Production site
Customer service
reThink & reFuel

LPI