In the overall ranking, the trucks gained third and fifth place. The third truck had to retire during the second stage of the race due to an accident on difficult terrain. In mid-March 2014, one of the trucks used in the rally and its driver, Eduard Nikolaev, came to visit Liebherr Machines Bulle SA where the engines were developed and manufactured.
Kamaz in Dakar rally
The Dakar rally, or better known simply as The Dakar, is one of the toughest challenges for drivers, vehicles and their components. Since 2009, for reasons of safety, its venue is no longer North Africa but Latin America instead. In 2014, a total of 204 vehicles crossed the finishing line in Valparaíso, Chile, in the motorcycle, quad, car and truck categories – which equates to only about 47% of all of the vehicles that started. In the trucks category, 71 vehicles started from Rosario in Argentina. Of that number, 50 reached the finish line after an overall distance of about 9370 km, spread over 13 stages.
The Kamaz Master team, formed 25 years ago, has dominated the event in the truck sector for many years and has won a total of twelve times since 1996. One of those wins was in 2013 with driver Eduard Nikolaev and team, and another in 2014 with driver Andrey Karginov and team.
Liebherr engines for Kamaz Master
Following changes to the engine regulations which, among other things, prescribe a 16.5 litre displacement limit, Kamaz Master will no longer be able to employ the same engines from 2016 that it has used until now. Of the companies competing to supply the engines, Liebherr ultimately came out as victor. Vladimir Guba, Technical Director of the Kamaz racing team, chose Liebherr engines mainly because of their reliability: "To win a race, not only are high engine performance and high speed decisive but also low failure probability and the shortest possible repair times." In this regard, he had a great amount of faith in the engines from Liebherr right from the outset, given that they prove their worth day in and day out in mining excavators and other equipment in extreme conditions, similar to those experienced during the Dakar rally.
Most of the teams employ special racing engines for the Dakar rally. Kamaz specifically opts for series production components in order to test their durability during the race and to gain knowledge for further development of the Kamaz product range. By choosing the 8-cylinder D9508 A7 engine from Liebherr, whose performance is rated at 505 kW or 686 HP in the series production version and whose maximum torque is just over 3000 Nm, both companies were confident that they would be able to utilise large power reserves.
In the race configuration developed by Kamaz and Liebherr, a maximum output of 720 kW or 965 HP is achieved alongside a maximum torque of 4000 Nm. The engine has a common rail injection system from Liebherr and a displacement of 16.2 litres. The 8.9 ton trucks can reach a maximum speed of 140 km/h for racing. They accelerate from 0 to 100 km/h in 10 seconds.