Mobile crane LTM 1110-5.2

LTM 1110-5.2

Mobile crane

LTM 1110-5.2 - Engineered for the future, built on experience.

1 becomes 2 because of 3 – the Liebherr LTM 1110-5.1 mobile crane becomes the LTM 1110-5.2. Quite simply because it has 3 new features – the crane control system, the driver's cab and the gearbox. The 5-axle crane, which was first unveiled at Bauma 2019, features the new driver's cab also unveiled at the trade show in prototype form, Liebherr’s new LICCON3 crane control system and also the recently announced ZF TraXon DynamicPerform gearbox. The oil-cooled multi-disk clutch on this gearbox is new. It has now undergone intensive testing and is ready for use. This means that the new LTM 1110-5.2 combines existing strengths with pioneering innovations to deliver greater safety and comfort. These new features are combined for the first time with a completely new crane design, which is prepared for telematics and fleet management systems and therefore represents the future for the all-terrain series.

LICCON3

Compare

Max. load capacity - 110 t
110 t
Telescopic boom - 60 m
60 m
Max. hoist height - 91 m
91 m
Max. radius - 66 m
66 m
Number of axles - 5
5

LICCON3

Compare

What's inside

LICCON3:

The third generation of the LICCON control system takes the familiar crane control to a new level and features some impressive new technologies.

AutoBallast:

Automatic ballasting at the touch of a button.

Hillstart-Aid:

Makes for easy starting on hills with no rolling backwards.

Variable support:

VarioBase® Plus support technology enables even higher lifting capacities.

Variable axle loads:

The quick-change ballast system means that axle loads of less than 10 t / 22,050 lb are no problem. The system delivers worldwide mobility.

Wear-free manoeuvring:

The new DynamicPerform clutch module on the TraXon gearbox transmits engine power via integrated disks that are cooled by oil circulation.

Photo gallery

Technical data

Max. load capacity	110 t
at radius	3.00 m
Telescopic boom from	11.50 m
Telescopic boom up to	60.00 m
Lattice jib from	2.90 m
Lattice jib up to	33.00 m
Drive engine/make	Liebherr
Drive engine	6-Zylinder-Diesel
Drive engine/power	400 kW
Number of axles	5
Drive/Steering standard	10 x 6 x 10
Drive/Steering option	10 x 8 x 10
Driving speed	85.00 km/h
Total ballast	29.00 t

Downloads

Technical Data - Mobile crane LTM 1110-5.2 [m/t]

PDF (5.2 MB)

Videos

Engineered for the future, built on experience
The models that test the limits

Boom/jib combinations

Driving conditions

On-road driving

Jobsite driving

Ballast systems

Counterweight

Technology

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The crane control system calculates the perfect engine speed for the diesel engine.

ECOdrive

ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.

Single-engine concept

Take one engine out to increase lifting capacity. Or more accurately – the superstructure is powered by the undercarriage engine. Gear shafts are routed from the distributor gear in the substructure via two mitre gears to the pump distributor gear in the superstructure. That enables us to remove one engine – and we use this to increase the crane’s lifting capacity.

Hillstart-Aid

Hillstart-Aid makes starting on gradients easier. Move off safely and easily without rolling backwards.

RemoteDrive

The RemoteDrive remote control enables the crane to be controlled from outside the driver’s cabin. This is not only possible during crane operations, but also whilst driving on the site. This delivers greater safety and comfort as the crane operator has a better view of problem areas as he can be right next to them. In other words, the operator can move himself to the areas with difficult access.

LICCON3

The third generation LICCON control system features the same time-tested operation as previous generations and adds a fast data bus, significantly more storage space and greater computing power. LICCON3 cranes are prepared for telematics and fleet management.

MyLiebherr

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes

MyLiebherr

Discover more

1 becomes 2 because of 3

The Liebherr LTM 1110-5.1 mobile crane has become the LTM 1110-5.2 because it has 3 completely new features – the crane control system, the driver's cab and the gearbox.

Customer magazine

The magazine for customers and friends of mobile and crawler cranes. Here you will find some extraordinary crane impressions and stories!

Used cranes

Liebherr is also specialized in used mobile and crawler cranes. We ensure the safety and durability of the cranes by our global service network.

LTM 1110-5.2

Mobile crane

LTM 1110-5.2 - Engineered for the future, built on experience.

What's inside

Photo gallery

Technical data

Downloads

Videos

Engineered for the future, built on experience

The models that test the limits

Boom/jib combinations

Boom/jib combinations

Driving conditions

On-road driving

Jobsite driving

Ballast systems

Counterweight

Technology

ECOmode

ECOdrive

Single-engine concept

Hillstart-Aid

RemoteDrive

LICCON3

VarioBase® Plus

AutoBallast

WindSpeed load charts

HVO ready

Assistance-systems

MyLiebherr

Discover more

Customer magazine

Used cranes

LTM 1110-5.2