
4 minutes - magazine 02 | 2026
“Travel with complete peace of mind.”
At Bauma 2025, Liebherr unveiled the new LTM 1055-3.3 under the slogan “Less weight for heavy lifting”. The 55-tonne crane is the lightest 3-axle all-terrain crane on the market.
LTM 1055-3.3 – a new level of mobility
Low axle loads and low total weight enable permanent driving permits to be granted across many countries worldwide. At the same time, the LTM 1055-3.3 impresses with high lifting capacities, especially with medium and large boom radii. With its 40-metre-long telescopic boom, it combines mobility and performance in a very special way. Numerous cranes have since been shipped to crane companies around the world.

Peace of mind: Company director Hagen Sommer is pleased that the process for obtaining driving road permits has been simplified.
Sommer Kranverleih GmbH based in Bremen has ordered no fewer than three of the new type of crane. “With the new LTM 1055-3.3, we can travel with complete peace of mind and go anywhere at any time. If a customer asks whether we have a crane available tomorrow, and the crane is available, we can take on the job. The issue of complex transport permits is no longer a factor,” explains Hagen Sommer, who runs the family business alongside his cousin Björn as part of the third generation.

Better visibility: Manoeuvring with RemoteDrive offers greater convenience and safety.
We’re joining crane operator Uwe Höfmann on one of his first jobs. His LTM 1055-3.3 is on the move with a ballast trailer and is already carrying the full 11-tonne counterweight. Nevertheless, the total weight of the combination remains at just 41.8 tonnes, whilst the axle loads are less than 9.5 tonnes. This means that, even in this travel configuration, the crane benefits from a nationwide permanent road permit in Germany. On site, the three-axle crane lifts all the ballast onto the vehicle in a single lift and is ready for use in no time at all.

In one lift The LTM 1055-3.3 lifts the ballast from the trailer and places it onto the chassis.
The journey takes us to the Lesum barrage, north of Bremen. The structure provides flood protection and serves as a bridge across the Lesum. Built more than 50 years ago, it is situated about one kilometre upstream of the point where the river flows into the Weser. “We’re carrying out repair work here: lifting off a roof, pouring concrete from buckets and then putting the roof back on,” says Uwe, describing the job.
What our customers have to say about the LTM 1055-3.3:

Relaxed Crane operator: Uwe Höfmann is delighted with his new piece of equipment.
RemoteDrive – when every centimetre counts
At first glance, the performance doesn’t seem particularly spectacular, but the backdrop of the barrage lends it a special character. Once the work has been completed and the crane dismantled, the operator gives a positive assessment: “I got the LTM 1055-3.3 three weeks ago, and I’m very happy. I very quickly got to grips with the new control system. It offers a lot of additional functions.”

Lightweight construction: With its 40-metre-long telescopic boom, the LTM 1055-3.3 offers high lifting capacities, especially with medium and large radii.
Uwe is particularly impressed by RemoteDrive: “Manoeuvring by remote control is a great help – especially on tight and congested building sites.” The new control system has also been very well received by his colleagues. “We’ve already had great experiences with LICCON3 on other types of crane. That’s why we’re delighted that the LTM 1055-3.3 is also fitted with it,” says Hagen Sommer.

Peaceful backdrop: The repair work at the Lesum barrage, however, is run-of-the-mill work.
This article was published in the UpLoad magazine 02 | 2026.




