News and press releases

More depth with the drilling rig LB 45.1

At this year's Bauma, Liebherr will be presenting the latest generation of the LB 45.1 drilling rig in the field of deep foundation. Thanks to the new lattice boom extension and innovative assistance systems such as the overload protection of the Kelly winch, the model sets new standards in application. The machine combines high performance, flexibility and efficiency and offers the best possible driver comfort with the new cab concept.

First electric duty cycle crawler crane: HS 8100.2 dual power

The first all-electric duty cycle crawler crane from Liebherr is one of the highlight exhibits at this year’s Bauma. With the HS 8100.2 dual power, the Liebherr Group is promoting the development of machines with the advantages of zero emission. The model offers various drive alternatives depending on the conditions on the jobsite and is a powerful all-rounder with its 30-tonne free-fall winches.

Liebherr presents LiReCon remote control system at Bauma 2025

At Bauma 2025, Liebherr will be demonstrating a new era in the operation of construction machinery: the Liebherr Remote Control System (LiReCon). The earthmoving and tower crane product segments will be demonstrating the practical application of this technology using a crawler excavator, a crawler dozer and a tower crane.

L 507 E: Liebherr’s battery-electric wheel loader

The L 507 E battery-electric wheel loader has been available from Liebherr sales partners in several European countries since Octobre 2023. The model is the first electric wheel loader in the group. It combines the demonstrable advantages of a Liebherr Stereoloader with a battery-electric drive design developed by Liebherr.

Slurry wall cutter LSC 8-20 and duty cycle crawler crane HS 8130.1

At this year’s Bauma, Liebherr is presenting the new package for demanding slurry wall work consisting of a duty cycle crawler crane and cutter. With new motorisation and 35-tonne free-fall winches, the HS 8130.1 is a real workhorse and can be used universally as a carrier machine. In combination with the higher torque of the LSC 8-20 cutter, the powerful duo is ideally suited for deep slurry walls with thicknesses of up to 2 metres.

Liebherr InnovationLab at Bauma 2025 – experience future technologies at close hand

Under the motto ‘Hands on the future’, Liebherr is showcasing practical products, technologies and solutions for the future of the construction and mining industry at Bauma 2025. The InnovationLab at the booth in the outdoor area is playing host to pioneering concepts from various Liebherr product segments.

Game of Cranes: Liebherr is looking for the world’s best mobile crane driver

Which company employs the best mobile crane driver? The crane manufacturer from Ehingen (Germany) is inviting its customers’ crane drivers to take part in the international “Game of Cranes” competition.

Liebherr Connect – connecting man, machine and environment

With Liebherr Connect, the Group is taking a further step in the digital networking of machines. Efficient data exchange represents major added value for customers and partners. Liebherr Connect is the key to digitalisation – today and in the future.

Systematic maintenance: Liebherr presents concept for the Digital Service Booklet

Liebherr-Werk Ehingen GmbH is presenting its concept for the Digital Service Booklet at Bauma 2025. The tool simplifies the maintenance and servicing of mobile cranes and provides both service technicians and crane operators with a user-friendly platform for managing service and maintenance information. This means that all information about the life cycle of a mobile crane can be collected online in one place and viewed at any time.

It's a matter of control: Liebherr presents LTM 1150-5.4, another mobile crane with new LICCON3 control system

Liebherr is pushing ahead with the modernisation of the crane technology and is presenting the latest generation of the 150-tonne crane, the LTM 1150-5.4. As part of the introduction of the new LICCON3 control system, the tried-and-tested LTM 1150-5.3 has been further developed. The 5-axle crane now shines not only with state-of-the-art technology, but also with the trend-setting crane design of the new series. In addition, the LTM 1150-5.4 is equipped with new driver assistance systems to increase driving safety on the road. Visitors can experience the result live: The LTM 1150-5.4 can be seen on the Liebherr stand at Bauma in Munich.

"Zero emissions, full power": Liebherr LTM 1150-5.4E mobile crane with electric drive

At Bauma 2025, Liebherr is presenting the LTM 1150-5.4, which has been converted to the new LICCON3 control system generation. A particular highlight is the LTM 1150-5.4E variant with electric drive, which allows the crane movements to be performed emissions-free and with reduced noise pollution. With an integrated battery, the crane can work autonomously for up to four hours without a power connection, and a low connected load on the construction site is sufficient to utilise the crane's full power, as the battery acts as an efficient buffer. The LTM 1150-5.4E meets the requirements of "Zero Emissions Construction Sites" and combines sustainability with maximum efficiency.

Less weight for heavy lifting: Liebherr LTM 1055-3.3 mobile crane takes mobility to a new level

Liebherr presents the lightest 3-axle all-terrain crane on the market at Bauma. The LTM 1055-3.3 redefines mobility, because complex and restrictive driving permits are a thing of the past. Low axle loads and gross vehicle weights enable comprehensive long-term driving permits on a large number of markets worldwide. Despite the lightweight design of the new 55-tonne crane, it offers high lifting capacities with its 40-metre telescopic boom, especially for medium and large radii.

Mobile and crawler cranes from Liebherr: digital in operation, digital at Bauma

From lift planning and crane operator training to maintenance, Liebherr-Werk Ehingen GmbH will be presenting its digital solutions for crane operation at Bauma 2025: visitors to the trade fair can find out about new products and updates both in the outdoor area in the mobile and crawler crane section and in the “Digital Technologies & Services” indoor area opposite.

LH 40 M Port E and LH 60 M High Rise Port E: Electrifying in port handling

Port handling is going electric: With the LH 40 M Port E and LH 60 M High Rise Port E, Liebherr is presenting two electric material handlers at Bauma that have been specially designed for the efficient handling of bulk and general cargo in ports.

Planning, training, crane operation and used machines: a variety of services for Liebherr tower cranes

Liebherr-Werk Biberach GmbH offers an extensive range of services for new and used cranes. The aim is to provide tailored crane solutions for projects of all kinds, from buying advice to giving machines a second life.

Liebherr shares its exciting electrification solutions for mining equipment at Bauma 2025

At this year’s Bauma exhibition in Munich Liebherr is showcasing some of its options for electrified mining equipment with its T 264 Battery Electric truck and the R 9400 E electric excavator exhibits. These two machines exemplify Liebherr’s commitment to providing customers with a range of zero emission solutions for mining operations.

Liebherr kicks off Bauma 2025 all together

On Sunday, Liebherr employees from around the world gathered at the Liebherr booth beginning the Bauma all together alongside the Liebherr family. Family shareholders Philipp Liebherr and Stéfanie Wohlfarth delivered a speech honouring the dedication and hard work of all employees in preparing for the event. Their words set the stage for what promises to be an exciting Bauma week.

The future is within touching distance: Liebherr wins an innovation award at Bauma 2025

Liebherr is bringing some 100 or so exhibits to Bauma 2025, to be displayed to the public on an exhibition space spanning more than 15,000 square metres. To kick off proceedings for the exhibition, the evening before the doors opened was marked with a ceremony to present the innovation award. The innovation award honours groundbreaking developments across five categories in the construction, construction material and construction machine industry.