Noticias y notas de prensa

Liebherr mobile cranes launch 100-tonne motor ship into water

The “Seegold” is a new motor ship for shuttle services on Lake Constance. In May two Liebherr mobile cranes have launched the 100-tonne ship's hull into the water. Tight spaces and the low capacity of the quay in Friedrichshafen made the lift a challenge. In use were an LTM 1350-6.1 from the Wiesbauer company, and an LTM 1400-7.1 from Paule.

La grúa móvil LTM 1300-6.2 con el concepto de Liebherr de un solo motor da buenos resultados en el empleo

Varias docenas de máquinas del nuevo tipo de grúa dan buenos resultados en obras en todo el mundo.

LTM 1300-6.2 mobile crane with Liebherr single-engine concept proves itself in use

Liebherr unveiled the new 300-tonne LTM 1300-6.2 at the Bauma 2013, featuring a brand new power concept to operate the superstructure. Instead of the twin-engine concept normally used on cranes in this class this crane is powered by a single engine with a mechanical shaft. Gear shafts are routed from the distributor gear in the substructure via two mitre gears through the centre of the slewing ring to the pump distributor gear in the superstructure. Several dozen models of this new crane have since proven their worth on sites around the world.

Liebherr LTF 1060-4.1 truck-chassis crane provides maximum load capacity of 60 tons

At the 2015 Maskin Expo, Liebherr displays the LTF 1060-4.1 truck-chassis crane with a maximum load capacity of 60 metric tons. This crane was first launched in 2009 as an addition to the top end of the cranes intended for installation on truck chassis. With a 40-metre telescopic boom and a 16 m double folding fly jib, this crane can lift loads to a height of up to 56 m and an outreach of 48 m.

Customer days of Liebherr Nenzing 2015: Viking Cranes choses two Liebherr crawler cranes

The Estonian crane rental company Viking Cranes has for the first time opted for Liebherr crawler cranes.

Elcon Crane Hire adds Liebherr LTM 1400-7.1 mobile crane to its fleet

South African crane contractor Elcon Crane Hire recently took delivery of a Liebherr LTM 1400-7.1 mobile crane. The 400-tonne model on a 7-axle chassis is a major expansion upwards for the crane fleet. Previously an LTM 1250-6.1 with a load capacity of 250 tonnes was the company's most powerful crane.

Tense night job for Gertzen – Liebherr mobile cranes fit out luxury liner at Papenburger Meyer shipyard

At the end of February in North Germany the "Anthem of the Seas", the largest cruise ship ever built in Germany was moved out of the massive Hall 2 dock at Papenburger Meyer shipyard. It was only possible to install the funnel casing and "North Star" viewing gondola outdoors due to the sheer size of the vessel. The order for this work was awarded to Gertzen, based in nearby Kluse, which completed the job smoothly using two 750-tonne mobile cranes. Gertzen used the Liebherr LTM 1750-9.1 from its own fleet and an LTM 1750-9.1 hired from Thömen.

Liebherr to present the 3-Axle Mobile Crane LTM 1060-3.1 at Vei og Anlegg 2015

Liebherr presents the LTM 1060-3.1 mobile crane at the Vei og Anlegg 2015 trade fair in Oslo, Norway. The 60-tonne machine has a 48 m long telescopic boom and offers enormous load capacities. Liebherr introduced the LTM 1060-3.1 at the 2013 Bauma in Munich, Germany.

La grúa móvil LTC 1045-3.1 pasa por un cuello de botella

La LTC 1045-3.1 de Cadman Cranes pasa por un túnel extremadamente estrecho en Londres.

BMS Heavy Cranes refuerza su parque de grúas con la grúa sobre orugas LR 11350

La empresa danesa BMS Heavy Cranes A/S reforzó su parque de grúas con una grúa sobre orugas para cargas pesadas LR 11350 en el mes de abril.

BMS Heavy Cranes A/S strengthens fleet with Liebherr LR 11350 crawler crane

Danish company BMS Heavy Cranes A/S added a heavy duty LR 11350 crawler crane to its fleet in April. The Liebherr crane with a maximum load capacity of 1,350 tonnes constitutes a major upwards extension to the family run company's fleet. The new LR 11350 is the largest crane in Scandinavia. In addition to the assembly of large wind turbines, it will be used for a range of projects throughout Europe.

Dornseiff adds Liebherr LTM 1500-8.1 and LR 1250 mobile and crawler cranes to its fleet

Two new Liebherr cranes have been added to the fleet operated by Dornseiff Autokrane und Schwertransporte GmbH & Co. KG based in Burbach in the German State of North Rhine-Westphalia. An LTM 1500-8.1 mobile crane and an LR 1250 crawler crane will strengthen the family-run company's crane fleet. The LTM 1500-8.1 with a maximum load capacity of 500 tonnes is the new flagship in the fleet.

Liebherr welcomed 900 Customers from the Construction Industry in Nenzing (Austria)

Last week, Liebherr-Werk Nenzing GmbH welcomed their customers from the construction industry at the factory in Vorarlberg

La manipuladora telescópica TL 436-7 Liebherr en Intermat 2015: nuevos modelos de manipuladoras telescópicas con una altura de elevación de 7 m

En la feria Intermat 2015, Liebherr presenta con el TL 436-7 un representante de las nuevas manipuladoras telescópicas con una altura de elevación de 7m. Tres modelos con una altura de elevación de 7 m están disponibles. En el momento del desarrollo se han tenido en cuenta especialmente las necesidades de las empresas de construcción y de alquiler de máquinas.

Planta de hormigón Liebherr Betomix 2.5 A-R en diseño modular en la feria Intermat 2015

Liebherr presenta en la feria Intermat 2015 en París la planta de hormigón 2.5A-R del programa de plantas Betomix. La planta está equipada con la nueva amasadora de eje vertical RIM 2.5-M. Gracias al sistema mecánico con agitador se pueden producir los tipos de hormigón más dificiles de forma perfecta.

Liebherr at the Vei og Anlegg 2015 in Oslo

Liebherr will be presenting a cross-section of its current range of construction machinery from the fields of earthmoving, material handling, mobile cranes and concrete technology on stand D 20.

Liebherr presenta la nueva grúa móvil compacta LTC 1050-3.1 en la Intermat 2015

Liebherr presenta por primera vez en la Intermat 2015 en Paris la nueva grúa móvil compacta LTC 1050-3.1 como sucesor de la LTC 1045-3.1. Gracias al uso parcial de un acero de grano fino aún más resistente y optimizaciones de los tramos telescópicos se ha podido aumentar aún más la capacidad de carga con dimensiones casi similares. Con las innovaciones de Liebherr VarioBase® y ECOmode los grúistas pueden manejar la nueva grúa de manera segura y eficaz. El motor diesel de 6 cilindros cumple con las nuevas normativas sobre emisiones de gases del nivel IV / Tier 4f.

Cómodo y ajustable de forma individual: el nuevo sistema de control de grúa Litronic para grúas torre de Liebherr

Liebherr ha perfeccionado su sistema de control Litronic para grúas torre. El moderno sistema se puede adaptar de forma individual a las necesidades de las múltiples aplicaciones.