Noticias y notas de prensa
Componentes
Resultados 109-126 de 330
22-09-2022
Notas de prensa
Liebherr presenta un nuevo compresor de 55 kW
El nuevo compresor de 55 kW de Liebherr se basa en un sistema ya probado, aporta un diseño optimizado, rentable y estandarizado que se puede adaptar a requisitos específicos manteniendo reducidos costes.
14-09-2022
Notas de prensa
Fuerza y sencillez: medición segura y eficiente de fuerzas en cilindros hidráulicos de Liebherr
Este nuevo tipo de medición de fuerzas en cilindros hidráulicos ayuda a medir de forma precisa y dinámica las cargas de tracción y compresión, tanto estáticas como dinámicas. En este momento hay un sensor específico en fase de prototipo. Los resultados mejoran la eficiencia y la seguridad en muy diversas aplicaciones móviles o fijas.
12-09-2022
Press releases
Wind main bearing: new single-row tapered roller bearing
Turning one into two: The new single-row tapered roller bearings for the main bearing arrangement in wind turbines expand Liebherr's product range. Two single-row tapered roller bearings find their use in yet another type of wind turbines. Mounted with some distance from each other on the shaft, the single-row tapered roller bearings have a lower moment effect. They are also smaller in design. With these newly developed main bearings, Liebherr is specifically responding to the customer demand.
07-09-2022
Notas de prensa
Liebherr presenta la inyección directa de H2 para motores de combustión de servicio pesado
Liebherr desarrolla sistemas de inyección para motores de combustión de hidrógeno utilizados en aplicaciones de carretera y fuera de carretera. La solidez contra el polvo, la suciedad y las vibraciones, así como otras condiciones ambientales adversas, son solo algunos de los requisitos clave. La potencia máxima y la alternancia de carga dinámica se encuentran entre los otros desafíos para los motores de combustión de H2. Acercarse al motor diésel en términos de rendimiento y conducción, en todas las aplicaciones, es uno de los mayores desafíos hasta el momento. El enfoque orientado al sistema de Liebherr para la inyección de hidrógeno combina varios componentes para regular la presión y el flujo. Esto permite las mismas características de manejo que un diésel, mientras mantiene una arquitectura del sistema robusta.
30-08-2022
Press releases
Always on track for progress: Liebherr at InnoTrans 2022
Liebherr will be attending InnoTrans in Berlin from 20 to 23 September under the motto "Always on track for progress". As one of the largest exhibitors at the fair, the company will be showing innovative products and technologies – including world premieres – for use on and off the rails.
28-06-2022
Press releases
Taking off with Liebherr electronics: high-tech drones by Quantum-Systems
The Munich-based drone manufacturer Quantum-Systems relies on Liebherr’s Electronics Manufacturing Services (EMS). In future, Liebherr’s Components product segment will manufacture the Quantum-Skynode autopilot and the motor controller for the “Vector” and “Scorpion” unmanned aerial systems in Lindau (Germany). Quantum-Systems drones are used worldwide for mapping, surveying and reconnaissance applications.
21-06-2022
Notas de prensa
Liduro Power Port (LPO) es un sistema móvil de acumulación de energía para el suministro de obras de construcción. La maquinaria y los equipos de construcción híbridos o completamente eléctricos pueden operarse o cargarse localmente sin emisiones con el sistema móvil de acumulación de energía. La alta densidad de potencia y el diseño compacto de LPO permiten un suministro eficiente y flexible a máquinas y obras de construcción con una amplia gama de requisitos de potencia. Su salida de potencia constante alcanza hasta 120 kW.
21-06-2022
Noticias
El mundo de los componentes de Liebherr en la feria Bauma 2022
En la feria Bauma 2022 que se celebrará entre el 24 y el 30 de octubre de este año, Liebherr ofrecerá una oportunidad única de conocer el mundo de los componentes junto con las innovaciones en máquinas de construcción, grúas, transbordo de material. Fieles el lema «On your site» del grupo, el segmento de productos componentes también demuestra que el equipo de Liebherr está al lado de sus clientes siempre y en todo momento: en la obra con tecnologías de producto innovadoras, con su asesoramiento personalizado y servicios en todo el mundo o a través de soluciones completas.
13-06-2022
Noticias
"On your site": Liebherr en Bauma 2022
En Bauma 2022, del 24 al 30 de octubre de 2022, Liebherr ofrece a los visitantes oportunidades únicas para experimentar de cerca los últimos desarrollos en máquinaria de construcción, grúas, tecnología de gestión de materiales, minería y componentes.
10-06-2022
Press releases
Study confirms Technology neutrality reduces the most emissions
In order to achieve the international climate objectives, economies worldwide must reduce their greenhouse gas emissions significantly in all sectors. This also applies to the construction industry and its partners. This is why Liebherr, as one of the largest construction equipment manufacturers, is also working on new, efficient drive concepts. In doing so, the company focuses on technology neutrality which has been affirmed by a recent study.
25-05-2022
News
Liebherr apprentices reach H2GP finals with hydrogen drive
Nine apprentices at Liebherr in Bulle (Switzerland) have won the "Pro" category of the semi-finals of the Horizon Hydrogen Grand Prix (H2GP). For the competition, they developed a hydrogen-powered car that has now left the competition behind in a 6-hour race. With this pole position, the team now heads to the world finals in Assen (Netherlands) from June 2-5.
16-05-2022
Press releases
Customer Day at Liebherr: Expanded Operations, Expanded Solutions
Liebherr USA, Co. hosted visitors from across the globe at their first Customer Day on May 12. The company highlighted and demonstrated a diverse range of products across all ten segments including earthmoving, material handling technology, deep foundation machines, tower cranes, mining, mobile and crawler cranes, maritime cranes, concrete technology, components as well as refrigerators and freezers.
12-05-2022
Press releases
AVR relies on Liebherr cameras and displays
The Belgian agricultural machinery manufacturer AVR relies on proven electronics from Liebherr: in the Puma 4.0 potato harvester, up to 16 digital smart cameras and two 12″ display controllers provide detailed real-time monitoring of the entire work process.
10-05-2022
Press releases
MyLiebherr homepage: new design and features enhance user experience
The homepage of the MyLiebherr online portal has a new look. Thanks to the modern design users benefit from a clearly structured, intuitive user interface and a clearly arranged homepage. Optimised and additional features round off the design update.
05-04-2022
Press releases
Liebherr’s MDC3 camera – The best choice for Sandvik
The Swedish group Sandvik supplies tools and equipment for various areas, such as metal cutting, mining and rock excavation. Due to the rough environmental conditions in underground mines, the company relies on proven robust and reliable components. Stress tests conducted by Sandvik showed that Liebherr's digital smart camera is ideally suited for demanding operating conditions. In addition, the camera reliably ensures easy viewing, even in very dark underground mining environments.
10-03-2022
Press releases
Liebherr and Tula join research activities
At the International Engine Congress in Baden-Baden (Germany), Liebherr-Components AG and U.S.-based Tula Technology presented the results of their joint study on heavy machinery. Together, the companies carried out research on reducing greenhouse gases (GHG) and nitrogen oxides (NOX) produced by heavy-duty equipment. Based on simulations, Tula’s diesel Dynamic Skip Fire (dDSF™) software allows the reduction of NOX tailpipe emissions by 41% and carbon dioxide (CO2) by 9.5%. For this study, Liebherr Machines Bulle SA provided its D966 engine that operates in a variety of applications, like mobile or maritime cranes and wheel loaders.
09-03-2022
Press releases
Wind-assisted propulsion: Harness the wind with Liebherr
Liebherr makes use of the wind as a resource for clean energy shipping, as well, and offers wind-assisted propulsion as an alternative solution. Slewing bearings and slewing drives excel at working together perfectly on high seas. The overall design of the wind-assisted propulsion consists of high, futuristic-looking sails that turn towards the wind and complement conventional ship propulsion still driven by diesel engines, for example. Hence, the technology harnesses the wind to propel a wide variety of vessels, such as bulk carriers, and thus ensures greater energy efficiency.