LTM 1060-3.1 - Ideally prepared for any road.

  • Reaches into the sky:

    Hoist heights of up to 63 m are possible with the folding jib attached.

  • Time-tested technology:

    The telescopic boom is extended using the time-tested TELEMATIK single-cylinder telescoping system.

  • Reduced fuel consumption:

    ECOmode and ECOdrive cut fuel consumption by up to 10%.

  • Superb design:

    Various driving configurations can be achieved by dividing the ballast slabs.

  • Optional VarioBase®:

    The prize-winning VarioBase® support system is available as an option to enhance safety.

LTM 1060-3.1

The LTM 1060-3.1 is designed for driving on roads with lots of ballast. A special method of dividing the ballast slabs has been included in the design of this mobile crane. This means that a wide range of driving configurations can be achieved quickly and easily. Its compact dimensions and time-tested ECOmode and ECOdrive make this mobile crane extremely economical to use. In addition to its compact size, the 3-axle crane features a long telescopic boom and impressive lifting capacities.

Max. load capacity 60 t
Telescopic boom 48 m
Max. hoist height 63 m
Max. radius 48 m
Number of axles 3

Technical data

Max. load capacity 60 t
at radius 2.10 m
Telescopic boom from 10.30 m
Telescopic boom up to 48.00 m
Lattice jib from 2.5 m
Lattice jib up to 16.0 m
Drive engine/make Liebherr
Drive engine 6-Zylinder-Diesel
Drive engine/power 270 kW
Number of axles 3
Drive/Steering standard 6 x 4 x 6
Drive/Steering option 6 x 6 x 6
Driving speed 85.00 km/h
Total ballast 12.80 t

Downloads

Ballast systems

Counterweight [t]

Counterweight [lb]

Boom/jib combinations

Boom/jib combinations

Driving conditions

On-road driving [t]

On-road driving [lb]

Technology

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

ECOdrive

ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The LICCON 2 control system calculates the perfect engine speed for the diesel engine.

A crane job between splendour and megalomania:

Every autumn, when the hordes of tourists at Herrenchiemsee New Palace start to dwindle, the palace park has to be made ready for winter. The LTM 1060-3.1 installed scaffold hoods to protect the stone fountains from snow and moisture. Find out more

MyLiebherr - your Liebherr service world:

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes, such as crane documentation, Crane Planner 2.0, the job planner and spare parts catalogue. Find out more