Press releases | 04/08/2019 Facelift: Liebherr mobile construction crane MK 88-4.1

  • Available beginning of 2020
  • More areas of application through different axle load options
  • When things get tight: half-sided support
  • Eco-friendly: emission-free operation through electric drives

Liebherr has updated its existing four-axle crane and will present the new MK 88-4.1 at Bauma 2019. The additional number at the end of the product name reflects the 4 axles and that it is the first version of this crane type. Featuring proven MK technology, this mobile construction crane is even more powerful and flexible than its predecessor. This is especially evident in a luffed jib position.

Facelift: The new Liebherr mobile construction crane MK 88-4.1.

Single image, web (696 KB)

New elements include, for example, its different axle load options, which make the crane significantly more economical. The construction machinery manufacturer has also taken the environment into account: The MK 88-4.1 can operate emission-free using even less power than its predecessor.

Both the 8,000-kilogramme maximum load capacity and the maximum radius of 45 metres remain the same. The maximum load capacity of 2,200 kilogrammes at the jib head also remains unchanged compared to the MK 88 Plus.

Increased trolley travel gear performance

In addition to the proven Load Plus function, which provides the mobile construction crane with up to ten percent more lifting capacity, the crane has also been equipped with a more powerful trolley travel gear. This enables the Liebherr mobile construction crane MK 88-4.1 to work with heavier loads, even at a 15° inclination and at a 45° luffed position. As a result, the maximum load capacity of the MK 88-4.1 is increased by up to 50 percent compared to its predecessor in a 45° luffed position. In practical terms, this means that it can lift 2,800 kilogrammes in a 45° luffed position instead of the previous 1,850 kilogrammes up to 21 meters outreach.

More areas of application through different axle load options

A new ballast concept makes different axle load options and, in turn, more areas of application possible. Therefore, the MK 88-4.1 has 3 different axle load variations. With additional ballast, the axle load amounts to less than 13 tonnes per axle. With only basic ballast, the Liebherr mobile construction crane has an axle load of under 12 tonnes. Without basic ballast, the axle load can be reduced to less than ten tonnes. This means that, for instance, the crane can even be driven on bridges and roads with axle load restrictions. By means of an adapted load curve, powerful operation is still possible with the ten-tonne version.

When things get tight: half-sided support

In addition, the MK 88-4.1, like the MK 140, can be used with half-sided support, so that possible road obstructions can be avoided. The standard support width is 7.0 m and can be reduced to 5.75 m if necessary.

Eco-friendly: emission-free operation

Thanks to their electric drives, Liebherr mobile construction cranes not only have a low-noise emission when in operation but are eco-friendly in the process. This is a major advantage for night-time operation. The new mobile construction crane MK 88-4.1 is now also equipped with a 32-amp connection in addition to the standard 63-amp connection. Through an intelligent energy management system, the maximum power available is used for crane operation. This means that the MK 88-4.1 can also be operated using less power, when on-site conditions don't allow otherwise.

Increased comfort for crane operators

In addition to the half-sided support feature, further elements of the larger MK 140 mobile construction crane have been adopted in order to create a uniform operating concept across the entire MK series. The MK 88-4.1 has, for example, been equipped with the elevating operator's cab of the MK140. This can be infinitely adjusted in height, has larger windows and is fitted with the latest equipment. Optional trolley and slewing platform cameras ensure a better all-round view and therefore a higher level of safety. The combined heating and air conditioning system allows the temperature in the cabin to be controlled perfectly.

The driver's cabin has also undergone a facelift, so that it is a more comfortable environment for the crane operator. As well as more ergonomic operating elements, small details such as an air-conditioned seat and a handy mobile phone holder have also been included.


Here you will find the press release and images for download.

Press Information: Mobile Construction Crane MK88-4.1 ZIP (3.8 MB)
Press kit: Bauma ZIP (267.9 MB)

Additional links


Hans-Martin Frech


Liebherr-Werk Biberach GmbH

Memminger Straße 120

88400 Biberach an der Riß