News and press releases

First LTM 1300-6.2 delivered to South Africa – Marlboro Crane Hire trusts in Liebherr mobile cranes

The Marlboro Crane Hire fleet has featured the very latest crane technology since September 2015. Liebherr delivered an LTM 1300-6.2 mobile crane to the South African crane rental company. One of the main reasons for selecting the Liebherr crane was its 78-metre telescopic boom. Furthermore, the long-term partnership between the two companies is based on trust and absolute reliability.

Liebherr Quarry Days attract over 1,000 visitors from all over the world

In the middle of October the Liebherr Group welcomed over 1,000 international customers from the quarrying sector in Saint-Nabor, France. The practical event offered visitors the opportunity to see a live demonstration of special Liebherr machines, and above all the chance to also test them out. There were new products among the 20 machines on show, such as the R 956 crawler excavator, the PR 726 crawler tractor and the new Liebherr large wheel loader XPower®.

Liebherr-Aerospace Ranks First in Customer Service Support for Dassault’s Falcon Fleet

Liebherr-Aerospace Toulouse SAS has recently received from Dassault Aviation an award as “Best Falcon Customer Service Provider” for the fourth consecutive year.

Liebherr Cranes used on the construction of Queensferry Crossing, Scotland

In Edinburgh (Scotland), more than 12 Liebherr cranes, including three Liebherr 630 EC-H 40 Litronic top-slewing cranes are involved every day in the Forth Crossing Bridge construction. Following its scheduled completion by the end of 2016, this 2.7 km long bridge will be the world’s longest cable stayed bridge with three towers. Products from three Liebherr divisions have been used extensively during the life of the project.

Liebherr-Aerospace at the NBAA 2015 Business Aviation Convention & Exhibition

At this year’s NBAA Convention & Exhibition, which takes place from November 17-19, in Las Vegas, Nevada (USA), Liebherr-Aerospace will be displaying state-of-the-art systems and components from its product lines flight control and actuation, air management and landing gear for business jets and helicopters of all sizes.

Roll-Out C919: Liebherr-Aerospace on board

Liebherr supplies major systems for the C919, COMAC’s commercial aircraft, which was unveiled to the public in Shanghai (China) on November 2, 2015.

Liebherr Components presents new product developments at Agritechnica 2015

Liebherr will present its innovative component solutions for agricultural and forestry machines as well as biogas and combined heat and power plants to visitors at the world’s largest agricultural technology exhibition, Agritechnica 2015, in Hanover from 8 to 14 November.

Liebherr SCRFilter: Exhaust gas aftertreatment system for stage V

At this year’s Agritechnica, Liebherr presents a solution for adhering to the EU emissions standard of the future stage V: The SCRFilter is already used in machines for tunnel construction, and has been certified for stage IV and the Swiss market and also conforms to the regulations planned for stage V. The SCRFilter system is part of the modular Liebherr engine concept, is extremely compact and is characterised by long service intervals of over 4,500 hours.

Medium pressure pump added to Liebherr hydraulic portfolio

At the trade fair for agricultural machinery, Agritechnica, from 8 to 14 November, Liebherr presents the newly developed LH30VO axial piston pump of swash plate design. This complements the existing product portfolio in the medium pressure pump range at 280 bar nominal pressure and is suited for use in mobile machinery. The pump for open circulation has a specific delivery rate of 45 cm³ per rotation and at the time of its market launch can be configured with two of the most common controls. The pump can be used in various applications in the agricultural and forestry area.

Liebherr presents electric version of FAT 325 travel drive

At the trade fair for agricultural machinery, Agritechnica, from 8 to 14 November, Liebherr presents a new version of the FAT 325 travel drive, which is powered by an electric motor from the PGF series. The electric travel drive was designed for devices with an operating weight of roughly 30 to 40 tonne and is ideal for crawler vehicles with a diesel-electric drivetrain. Liebherr is thus following the electrification trend of off-highway devices, which aims at improving overall efficiency levels.

New generation of common rail systems from Liebherr with additional installation version

At the trade fair for agricultural machinery and equipment Agritechnica from 8 to 14 November 2015, Liebherr is presenting a new installation version of its pioneering common rail injection system 11.2 as well as a new inhouse developed and manufactured engine control unit, which is planned for series production in mid-2016. The whole system is designed to meet the common offroad emissions standards as well as onroad guidelines EURO V and EURO VI.

Liebherr Components presents new product developments at Agritechnica 2015

Liebherr will present its innovative component solutions for agricultural and forestry machines as well as biogas and combined heat and power plants to visitors at the world’s largest agricultural technology exhibition, Agritechnica 2015, in Hanover from 8 to 14 November.

Liebherr VarioBase® allows bridge to be constructed

Liebherr LTM 1160-5.2 and LTM 1130-5.1 mobile cranes from Senn replace railway bridge despite minimal space availability for the cranes over a period of eight nights.

Liebherr VarioBase® allows bridge to be constructed despite minimal space availability for mobile cranes

The first model of the new Liebherr LTM 1160-5.2 mobile crane was delivered to Swiss crane contractor Senn AG in the summer. Working with an LTM 1130-5.1 the new mobile crane completed a job during the last few weeks which other cranes would not have managed as a result of the restricted amount of space available. Over a period of eight nights, a 100-year old railway bridge was replaced in Aarwangen in the Canton of Bern. It was only possible to erect both cranes on a narrow, parallel road bridge using the VarioBase® variable supporting base developed by Liebherr.

Liebherr wins regional National Apprenticeship Award

Liebherr-Great Britain Ltd. in Biggelswade is winner in the category “BAE Systems Large Employer of Apprentices” of the regional final of the National Apprenticeship Award 2015 three years in a row.

Rolls-Royce and Liebherr-Aerospace announce name of power gearbox joint venture and start of operations

Rolls-Royce and Liebherr-Aerospace have named their 50:50 joint venture to develop manufacturing capability and capacity for the power gearbox for Rolls- Royce’s new UltraFan™ engine design. The new company, to be known as Aerospace Transmission Technologies GmbH, officially started operations at the site of Liebherr-Aerospace in Friedrichshafen last month.

Liebherr to Supply Hydraulic Actuators for Leveling Systems of Low-Floor Trams in Boston

Liebherr-Transportation Systems has once again been selected by Construcciones y Auxiliar de Ferrocarriles, S.A. (CAF) to supply hydraulic actuators for leveling systems. These will be employed in low-floor trams in Boston, Massachusetts (USA).

1,000-tonne load capacity for Hungary – Ács-Gép takes delivery of three new Liebherr mobile cranes

The Hungarian crane market has recently expanded by three Liebherr mobile cranes with a total load capacity of 1,000 tonnes. Ács-Gép Holding invested in an LTM 1200-5.1, an LTM 1300-6.2 and an LTM 1500-8.1. Reliable, experienced local Liebherr service provides Ács-Gép with security for its practical crane operations. At the same time the company rates Liebherr cranes as very reliable and progressive. Ács-Gép has acquired the very latest mobile crane technology in the form of the LTM 1300-6.2. The LTM 1500-8.1 is now the largest Liebherr mobile crane in Hungary.