News and press releases

New maximum: Flossdorf adds Liebherr LTM 1650-8.1 mobile crane

Dietmar Flossdorf GmbH ventured into the large crane class in 2017 with the LTM 1500-8.1. Now, four years later, the next step is being taken with the LTM 1650 8.1: the crane and heavy transport specialist from Bad Neuenahr in the German state of Rhineland-Palatinate is increasingly receiving inquiries for situations where the performance of the 500-tonner no longer suffices.

Signed and sealed – Liebherr to kick off assembly of hydraulic cylinders in China

With an assembly line in China, Liebherr is expanding its capacity for the production of hydraulic cylinders in the Components Division. These are destined for the Chinese market and can from now on be manufactured directly in Asia.

Replacement after 23 years: RMT rounds off all-terrain crane fleet with Liebherr LTM 1130 5.1

RMT Albert Regel Logistik GmbH has taken delivery of a new LTM 1130-5.1 at the Liebherr plant in Ehingen. The specialist for heavy transport, crane and assembly logistics from Baunatal in the German state of Hessen is replacing a 23-year-old LTM 1120, previously the smallest mobile crane in the fleet, with the Liebherr 130-tonner. The new crane has a 15 metre-longer telescopic boom for a total length of 60 metres.

Liebherr: The Liebherr Group achieves over ten billion euros in annual turnover

In 2020, the Liebherr Group achieved a turnover of € 10,341 million.

First LTM 1120-4.1 on the Iberian Peninsula for Grúas Aguilar, Quality Grúas and Transgrua

Sometimes getting to the site is one of the most difficult tasks of the job. Having a mobile crane with high lifting capacities and a long reach to work in narrow or hard-to-reach construction sites prompted Grúas Aguilar (Madrid), Quality Grúas (Barcelona) and Transgrua (Lisbon) to purchase the new Liebherr LTM 1120-4.1 mobile crane.

Liebherr Receives Gold Award from COMAC

Liebherr has been honored by COMAC as “2020 Supplier of the Year” for its air management system on board the ARJ21 aircraft.

New and used – three more Liebherr mobile cranes for Moroccan customer SCIF

Moroccan company SCIF (Société Chérifienne de Matériel Industriel et Ferroviaire) is a leading contractor in the fields of construction and industrial plant installation. The company decided to expand its existing fleet of mobile cranes with two LTM 1070-4.2 all-terrain cranes and an LRT 1100-2.1 rough terrain crane as a result of the positive development in its industrial plant installation segment. For the LRT 1100-2.1 and one of the two LTM 1070-4.2 models, SCIF decided to buy used machines, trusting in Liebherr’s competence as a manufacturer.

Liebherr-Aerospace at MRO Americas 2021

Liebherr-Aerospace participates in the world’s largest conference dedicated to aftermarket support.

More with the same – I.V. Guindastes upgrades LR 1600/2-W

To do more with less or with the same is what everyone is looking for in terms of operational efficiency. With the option to upgrade LR 1600/2-W narrow track crawler cranes, Brazilian crane contractor I.V. Guindastes started operating in even higher and larger wind power towers using the equipment they already had in their fleet.

Beyond borders: services for the wind industry

Russia has made significant progress in the generation of wind power in recent years, although largely unnoticed. When the Russian government decided to increasingly promote renewable energy in 2017, new opportunities opened up for wind turbine manufacturers. At that time, the share of wind energy in Russia made up 0.02 % of the overall energy consumption. By 2035, the Russian Ministry of Energy is aiming to further expand wind energy capacity to nine gigawatts - enough to supply around eight million households. In order to build wind turbines in Russia, manufacturers must meet the requirements for local production, which serve to strengthen the local labour market.

Two new local zero emission excavators from Liebherr: R 976-E and R 980 SME-E electric crawler excavators

The R 976-E electric crawler excavator, along with the R 980 SME-E, replaces the ER 974 B for mine and quarry extraction. The latest electric excavators to be developed and produced by Liebherr-France SAS in Colmar, France, they are not just converted diesel machines. The excavators and their electric power system were designed and produced entirely by Liebherr.

LiView position transducer in the new crawler loader generation

LiView, the intelligent position transducer for hydraulic cylinders, allows for reliable control of the bucket in the new Liebherr LR 636 G8 crawler loader using precise measurement data – even under the most demanding conditions.

Liebherr Analytics in Service

Liebherr-Aerospace has already collected data of more than 300,000 flights of 300 aircraft. The company offers new predictive maintenance services.

Bulet takes delivery of the first Liebherr LRT 1090-2.1 rough terrain crane in Nigeria

Construction contractor Bulet International Nigeria Ltd has taken delivery of a new Liebherr LRT 1090-2.1. This is the first Liebherr LRT series rough terrain crane in Nigeria. The high safety standards and VarioBase® variable support base as well as Liebherr’s familiar good service were important criteria behind the decision to buy the rough terrain crane for the company based in the capital Abuja.

Urban development in Bremen – Sommer installs components for stairwell using LTM 1450-8.1

Covering an area of around 300 hectares, Überseestadt in Bremen is one of the largest urban development and port revitalisation projects in Europe. A Liebherr LTM 1450-8.1 mobile crane from Bremen crane specialist Sommer Kranverleih GmbH installed components weighing 20 tonnes for a connecting stairwell on one of the most striking building in the area, the 18-storey “Zech-Haus” at the head of Europahafen.

Liebherr R 9600 excavators perform in Australia

Liebherr’s new 600-tonne mining excavator, the R 9600, enters the market backed by experience in the field at two Australian mines: BHP’s South Flank iron ore mine and Coronado’s Curragh North metallurgical coal mine operated by Thiess.

A second added to the fleet – Rothmund shows its support for the Liebherr LTM 1230 5.1 mobile crane

Rothmund GmbH Kran und Montage has purchased another LTM 1230-5.1 from Liebherr. The reason behind the purchase decision was the good experience the Pforzheim-based company has had with the first machine of this type it purchased around six months ago. Managing Director Heiko Brückner is particularly impressed with the boom length, capacity and variability of the Liebherr 5-axle crane.

The new MK 73-3.1 mobile construction crane from Liebherr: a compact taxi crane with optimal reach

The new MK 73-3.1 mobile construction crane is the smallest in Liebherr’s mobile construction crane family and complements the crane series comprising the MK 88-4.1 and MK 140. The compact 3-axle crane is the answer to market demands for a small, compact and agile mobile construction crane that is fast and flexible in operation.