News and press releases

Modernisation – two new Liebherr mobile cranes for Würzburger Kranverleih

Würzburger Kranverleih und Bergungsdienst GmbH took delivery of two new Liebherr mobile cranes in October. The family-run company will be using the LTM 1030-2.1 and LTM 1110-5.1 to modernise its fleet, 80 percent of which is made up of Liebherr cranes.

One hoist instead of three – new boom system on the LR 11000 delivers greater efficiency

The Nordex Delta 4000 wind turbine with a rotor diameter of 149 metres is the latest generation onshore system in the four to five megawatts power class. In the past, three hoists were required to install the generator at its hub height of 108 metres – the nacelle, drivetrain and hub were hoisted separately and assembled at the top of the tower. American crane specialist Buckner Heavy Lift Cranes has now demonstrated that the work can be carried out more quickly, more easily and more economically – with one hoist rather than three.

Closing the gap – Schlamann takes delivery of Liebherr LTM 1060-3.1 mobile crane

Schlamann-Autokrane GmbH has taken delivery of a new Liebherr LTM 1060-3.1 mobile crane. The northern German crane contractor based at Marklohe near Nienburg will use the 60 tonne crane to replace an LTM 1045-3.1 and upgrade its fleet in the class between 50 and 90 tonnes.

Increased hoist height and radius – Liebherr unveils a jewel for any crane fleet with the LTM 1150-5.3

After manufacturing around 1500 units, Liebherr has now unveiled the successor to its successful LTM 1130-5.1 – the LTM 1150-5.3. With a maximum lifting capacity of 150 tonnes and a 66 metre telescopic boom, it is also the perfect addition to Liebherr’s crane range below the 180 tonne LTM 1160-5.2. The 10 percent longer telescopic boom compared to its predecessor will hoist on average 15 percent higher loads with both maximum and part ballast. And with this in mind, the Liebherr engineers have produced a minor miracle – the new crane has the same low gross weight as its predecessor. With an axle load of twelve tonnes, the crane can carry nine tonnes of ballast on public roads.

Mammoet takes delivery of first ever Liebherr LTM 1650- 8.1 mobile crane

The first ever LTM 1650-8.1 left the Liebherr plant in Ehingen with a black and red livery. It is going to Dutch global crane and heavy haulage contractor, Mammoet.

New top dog – Sommer invests in Liebherr LTM 1750-9.1 mobile crane

Sommer Kranverleih GmbH based in Bremen has upgraded its fleet – the 800 tonne LTM 1750-9.1 mobile crane is now the company’s flagship. The Liebherr 9-axle crane is now supplied as standard with new lifting capacity values which upgrade the crane almost throughout its entire operating range. The performance of the LTM 1750-9.1 has been significantly upgraded particularly for wind power jobs.

“The V-frame makes us extremely flexible”

The fourth generation of the owner family of crane and heavy haulage contractor Wiesbauer GmbH made their first trip to the Liebherr plant in Ehingen to take delivery of a crane. This traditional family-run company based in Bietigheim-Bissingen (Baden-Württemberg) has significantly upgraded its crane fleet. Not only did the Swabian company take delivery of another LTM 1750-9.1 mobile crane, but an LTR 1220 telescopic crawler crane and a new 1000 tonne crawler crane were also added to its fleet. This LR 11000 celebrated a fantastic premiere in summer by hoisting a bridge to the north-east of Stuttgart.

Liebherr MK 88-4.1 mobile construction crane handover in Andalusia

Grúas Alhambra, a Spanish lifting and transport service company based in Granada, continues to opt for Liebherr and has taken delivery of a new MK 88-4.1 mobile construction crane.

A specialist crane for Kurth – LTC 1050-3.1 with RemoteDrive

Kurth Autokrane has decided on a genuine specialist – the Liebherr LTC 1050-3.1 compact crane is perfect for difficult jobs in constricted areas. The company ordered the 50 tonne crane with functional equipment to ensure particularly high safety and efficiency.

Historic backdrop – Wilden hoists work platform out of the river using Liebherr LTM 1090-4.2 mobile crane

Work platforms are regularly placed into the water of the River Wupper in Wuppertal for the annual inspections of the car and pedestrian bridges over it. At the start of September, Wilden Kran - Vermietung GmbH hoisted a telescopic platform out of the river in front of an historic backdrop.

HKV’s Liebherr LR 1500 crawler crane extremely flexible for handling heavy loads and erecting construction cranes, bridges and wind turbines

“Powerful – compact – simple” was the slogan used by Liebherr to advertise the LR 1500 crawler crane at its market launch during the Bauma 2016. The overall concept of the 500-tonne lattice boom crane is designed for simplicity in everything and great economy. By completing two jobs in one week, HKV Schmitz + Partner GmbH from Cologne proved that the Liebherr concept is a successful one.

All in the head – 1,000 tonnes on an 800 tonne crane

“Maximum performance is all in the head” – the fact that this saying does not just apply to sport was shown recently at the Liebherr test site in Ehingen when a 1,000 tonne test load was suspended from the hook of the LR 1800-1.0. This incredible performance was made possible by the new 800 tonne heavy duty head.

The latest technology for erecting wind turbines - new major order from MaxiKraft for Liebherr

Crane and heavy haulage contractor MaxiKraft has placed an order with Liebherr for lattice boom cranes for industrial and wind power jobs – the order for LR 1800-1.0 and LR 11000 crawler cranes and the LG 1750 lattice boom mobile crane is the largest single order for lattice boom cranes that Liebherr has ever received from within Germany.

Norwest Crane Hire brings first LRT 1100-2.1 to Australia

The Australian company Norwest Crane Hire recently invested in two new cranes: an LTM 1300-6.2 and an LRT 1100-2.1 from Liebherr. The 100-tonne rough-terrain crane is the first of its type anywhere in Australia.

Flexibility in action – two new Liebherr LTM 1110-5.1 mobile cranes for Wasel

Wasel GmbH has taken delivery of two new Liebherr LTM 1110-5.1 mobile cranes. The crane and heavy haulage contractor based in Bergheim will use the new 110 tonne cranes to replace two LTM 1100-5.2 machines. As a result of the great flexibility of the new Liebherr 5-axle crane, Wasel plans to gradually replace other 100 tonne models in its crane fleet with the LTM 1110-5.1.

Low consumption and high comfort

Salerno Container Terminal SPA, one of the leading Italian terminal operators, relies on Liebherr Port Equipment. SCT operates 10 Liebherr machines, including six Liebherr reachstackers. In addition to the high Liebherr quality, the LRS 545 impressed above all with its low diesel consumption and very good driving characteristics. SCT's reachstacker drivers underline the comfort in the cab and the good view of the load and surroundings.

Trio of new cranes for Welti-Furrer

Swiss company Welti-Furrer has taken delivery of a trio of new cranes from Liebherr. The ensemble comprising an LTC 1050 3.1 compact crane, an LTM 1130-5.1 and an LTM 1160-5.2 will introduce a whole series of technical refinements into the fleet and improve its capacity. Fabian Meier, Managing Director of Heavy Goods Logistics at Welti-Furrer, is impressed by the value for money of Liebherr mobile cranes.

New all-rounder joins the Kran Burgard fleet

The brand new LTM 1110-5.1 from Liebherr is a genuine all-rounder. It has been a member of the Kran- und Bergungsdienst Kran Burgard fleet since July. The Hesse-based company is delighted with the flexibility of the 5-axle crane – the LTM 1110-5.1 features variable axle loads, high lifting capacities with part ballast and efficient set-up processes. This innovative new crane was first unveiled at the Bauma 2019 event. Deliveries of it to customers all over the world started in June this year.