News et communiqués de presse

LH 26 M Industry Litronic : manutention efficace des matériaux

La machine de manutention LH 26 M Industry Litronic exposée sur Intermat 2018, qui est conforme aux exigences de la phase IV / Tier 4f., représente la série Liebherr des petites machines de manutention de matériaux. Elle est extrêmement robuste et performante et convient particulièrement à une utilisation dans le recyclage des matériaux et de la ferraille.

Harbour Dredging: Hybrid Duty Cycle Crawler Crane with 300 t Capacity in Operation in Piombino

The currently largest duty cycle crawler crane type HS 8300 HD from Liebherr is presently carrying out dredging work in Piombino. The aim of the project is to remove deposited sediment from the mouth of the port and also to increase the depth of the water. For this purpose the hybrid duty cycle crawler crane is equipped with a hydraulic clamshell grab with a filling capacity of 22 m³.

Harbour Dredging: Hybrid Duty Cycle Crawler Crane with 300 t Capacity in Operation in Piombino

The currently largest duty cycle crawler crane type HS 8300 HD from Liebherr is presently carrying out dredging work in Piombino. The aim of the project is to remove deposited sediment from the mouth of the port and also to increase the depth of the water. For this purpose the hybrid duty cycle crawler crane is equipped with a hydraulic clamshell grab with a filling capacity of 22 m³.

Liebherr enrichit sa gamme de chargeuses sur chenilles de la génération 6 – introduction de la nouvelle LR 626

Liebherr complète sa gamme de chargeuses sur chenilles de la génération 6 avec la nouvelle LR 626 Litronic.

The Liebherr LH 50 M Industry Litronic material handler at Elmia Wood 2017

At this year‘s Elmia Wood International Forestry Trade Fair in Jönköping, Liebherr is presenting the LH 50 M Industry Litronic material handler. This machine impresses with its efficiency and high levels of performance. The standard Liebherr regenerative power system ensures optimal handling while, at the same time, delivering lower fuel consumption. The machine attachment is available in a variety of versions, which means that it is always ideally matched to the application in hand.

Liebherr presents the LH 35 M Timber Litronic material handler at Elmia Wood 2017

With the LH 35 M Timber Litronic material handler, Liebherr showcases a powerful all-round talent in timber handling at Elmia Wood 2017. The timber handler represents reliability and a high level of driving comfort. It also impresses with low fuel consumption and outstanding performance. These are impressive selling points, particularly for challenging timber handling tasks.

At Elmia wood 2017, Liebherr is presenting the new L 580 LogHandler XPower®

At this year’s Elmia Wood, Liebherr will display the new L 580 LogHandler XPower® for efficient log handling. The new edition is based on the successful XPower design of the Liebherr large wheel loaders. The L 580 LogHandler XPower® impresses with an extensive range of innovations and improvements regarding its robustness.

Liebherr presents the LH 35 M Timber Litronic material handler at Ligna 2017

With the LH 35 M Timber Litronic material handler, Liebherr showcases a powerful all-round talent in timber handling at LIGNA 2017. The timber handler represents reliability and a high level of driving comfort. It also impresses with low fuel consumption and outstanding performance. These are impressive selling points, particularly for challenging timber handling tasks.

World Premiere: At Ligna 2017, Liebherr is presenting the new L 580 LogHandler XPower®

At this year’s Ligna in Hanover, Liebherr will premiere the new L 580 LogHandler XPower® for efficient log handling. The new edition is based on the successful XPower design of the Liebherr large wheel loaders. The L 580 LogHandler XPower® impresses with an extensive range of innovations and improvements regarding its robustness.

Red Dot Design Award 2017 for the new Liebherr L 580 LogHandler XPower®

The Liebherr L 580 LogHandler XPower® has won the 2017 Red Dot Award in the Product Design category. The jury of eminent experts was impressed by the distinctive lines and powerful lift arm of the L 580 LogHandler XPower®. The Liebherr-Werk Bischofshofen celebrates winning the prestigious design award just weeks after the global market launch of the L 580 LogHandler XPower®. The Red Dot Design Award is one of the most important international awards in the field of design.

Liebherr material handler LH 24 M Litronic at Smopyc 2017: compact and powerful

At Smopyc 2017, Liebherr presents a representative of the small material handlers with the LH 24 M Litronic. The LH 24 M is available with both a four-point outrigger and with stabilising blade and two-point outrigger.

Liebherr-Australia at Diesel, Dirt & Turf Expo

The 2017 Diesel, Dirt & Turf Expo took place from 21 - 23 April in Penrith, NSW.

The New Liebherr material handler LH 40 M Industry Litronic at Conexpo 2017

With the LH 40 M Industry material handler, Liebherr presents a top performer in its class at Conexpo 2017. The LH 40 is available both with a wheeled and a crawler undercarriage. The LH 40 material handler provides maximum handling capacity and low fuel consumption.

Rocky Point Mulching – Australian Farmer Of The Year 2016 Winners

Rocky Point Mulching is a third-generation family owned and operated business, which focuses on environmental sustainability, renewable resources and recovery development.

Ready for operation: Two new Liebherr LH 50 High Rise Industry material handlers at MMK Metalurji in Dörtyol

Two Liebherr material handlers were recently added to the machine fleet of the Turkish company MMK Metalurji in Dörtyol, and are already impressing with their high performance and low fuel consumption.

Expansion of Barcelona airport with duty cycle crawler cranes from Liebherr

Three Liebherr duty cycle crawler cranes were involved in infrastructural work in the course of the expansion of Barcelona-El Prat Airport.

Liebherr at the Bauma China 2016 Trade Fair

At Bauma China 2016, the Liebherr Group showcases the latest technologies and developments in construction machinery and components from November 22-25, 2016 in Shanghai, China. At the International Trade Fair, Liebherr presents its construction equipment at outdoor booth B12 and its in-house developed components at indoor hall N4 / booth No. 420.

Liebherr material handlers speed up the unloading of wagons at Novorossiysk Sea Port

With the new LH 120 Gantry Port material handlers from Liebherr, Novorossiysk Commercial Sea Port (NCSP) has been able to increase material handling performance three-fold.