Uutiset ja lehdistötiedotteet

Entry into Service: Liebherr-Aerospace on Board the BelugaXL

Liebherr: systems and components supplier for the BelugaXL

Liebherr and Cummins cooperate in power generation

The Liebherr Components Division and Cummins Inc. start a cooperation in power generation. For the Cummins new C25G gas generator series, Liebherr will provide fully equipped gas engines, which comprise ignition and control systems for natural gas and biogas applications in 50Hz and 60Hz markets.

First Flight G700: Pneumatics by Liebherr on Board

Recently, the business jet G700™ made its successful first flight. Liebherr supplies components for the Pearl 700 engine that powers the aircraft.

Liebherr Electrical Compressor Certified by Chinese Authorities

The Chinese PROME P390 fuel cell system featuring an integrated electrical compressor developed by Liebherr has been successfully certified.

Used LG 1750 for S.E Levage – successful and fast at a wind farm

Last autumn, French crane and haulage contractor S.E Levage bought an LG 1750 from Liebherr in Ehingen. The notable thing about this was that the mobile lattice boom crane was from the large stock of used cranes which the crane manufacturer markets. The powerful mobile crane went from the factory to France where a number of wind farms are currently being constructed. In ideal weather conditions, the LG 1750 can erect up to three turbines in a week. This is made possible by an excellent set-up concept and fast manoeuvring to the next site.

Decision for the performance, low fuel consumption and comfort: Rokemann buys Liebherr R 924 G8 crawler excavator

"With its great versatility and optimal performance, the R 924 G8 fully meets our requirements", says Maxime Enderlin, son of the founder of Rokemann, summing up his decision for Liebherr. The Alsatian company decided on the new crawler excavator generation from Liebherr for various excavation and earthmoving jobs. The contractor is impressed by the efficiency and performance of these machines and appreciates the stability, comfort and versatility of the R 924 G8.

Liebherr continues its commitment to research as one of the main sponsors of the reference construction site on the West Campus in Aachen

The Center Construction Robotics, of which the Liebherr Tower Cranes division is a founding member, enables science and industry to conduct research under real conditions.

Liebherr-Aerospace Signs Landing Gear Overhaul Agreement with Great Dane Airlines

Liebherr-Aerospace will overhaul the landing gear shipsets of Great Dane Airlines’ Embraer E195 fleet.

Maximum lifting capacity on four axles – Liebherr unveils the new LTM 1120 4.1 at the Conexpo in Las Vegas

Liebherr will be unveiling its new LTM 1120-4.1 at the CONEXPO in Las Vegas using the slogan “There’s nothing more on 4!” It is the most powerful 4-axle all-terrain crane ever built. The new 120-tonne machine breaks into a performance class which has previously been the sole preserve of 5-axle cranes. As far as boom length is concerned, it is on a par with 200-tonne class cranes as its 66 metre telescopic boom is the longest ever to be installed on a 4-axle mobile crane. Liebherr will start deliveries of the new LTM 1120-4.1 in autumn 2020.

Liebherr MK 88 Plus mobile construction crane masters 1,600 lifts in the Swiss Alps

In the autumn of last year, a crane operation of epic proportions was required for one of the largest infrastructure projects currently under way in Switzerland. Under considerable time pressure, a new 900-square-metre base structure needed to be constructed for the new imposing Lake Grimsel arch dam in the Alps before the onset of winter. A large-scale concrete mixing plant is due to be built on the base this spring. The construction company Frutiger AG is involved in the project and in October deployed its MK 88 Plus Liebherr mobile construction crane to the construction site, located at an altitude of almost 2,000 metres, for this Alpine assignment.

Less Greenhouse Gas Emissions at Liebherr-Aerospace Toulouse

Based on a coherent strategy, Liebherr-Aerospace Toulouse was able to decrease its emissions by more than 30% during the last four years.

“That was close!” Historical Bridge Turns into a Challenge

The renovation of a historical railway bridge calls for a spectacular assignment in Switzerland. What is so special about it? The challenges began even before a single metre was drilled for the deep foundations.

Maximum lifting capacity on four axles – Liebherr unveils the new LTM 1120 4.1 at the Conexpo in Las Vegas

Liebherr will be unveiling its new LTM 1120-4.1 at the CONEXPO in Las Vegas using the slogan “There’s nothing more on 4!” It is the most powerful 4-axle all-terrain crane ever built. The new 135 US ton (120 t) machine breaks into a performance class which has previously been the sole preserve of 5-axle cranes. As far as boom length is concerned, it is on a par with 240 US-ton (200 t) class cranes as its 217 ft (66 m) telescopic boom is the longest ever to be installed on a 4-axle mobile crane. Liebherr will start deliveries of the new LTM 1120-4.1 in autumn 2020.

First Liebherr portal slewing crane in the US

North Carolina Ports opted for a new Liebherr portals lewing crane type LPS 420. The multi purpose machine is equipped with a special designed curve traveling gear that allows the crane to travel a 90 degree curve with a inner radius of 90 metres. The fully assembled crane was handed over in autumn 2019.

First Liebherr portal slewing crane in the US

North Carolina Ports opted for a new Liebherr portals lewing crane type LPS 420. The multi purpose machine is equipped with a special designed curve traveling gear that allows the crane to travel a 90 degree curve with a inner radius of 90 metres. The fully assembled crane was handed over in autumn 2019.

Two years on a major construction site – LTR 1060 in flexible action on a site measuring 1.2 km

An ambitious infrastructure project has been ongoing in Berne, Switzerland for the last three years. There is demand to massively increase capacity for rail travel. To cover this, an additional four-track railway station for regional trains will be built under the existing central station in Berne by 2027. A Liebherr LTR 1060 crawler crane owned by construction group Frutiger AG has been providing excellent service for around a year on one of the many track sections which have been adjusted and expanded for this project.

Picked up in person: Poland’s first Liebherr Fibre Crane

The first ever tower crane with fibre rope for Poland: A 240 EC-B 10 Fibre has been dispatched and delivered to the Polish company Mazur Zurawie Sp. z o. o. Mazur and company representatives travelled to Liebherr-Werk Biberach GmbH in Germany specifically for this much-anticipated event.

Liebherr MK 88 mobile construction crane handover in Guadeloupe

Maxilevage, a small French lifting and transport company based in Guadeloupe, has opted for Liebherr for the first time, taking delivery of an MK 88 mobile construction crane.