LTM 1230-5.1 - Long, powerful and versatile

  • Maximum lifting capacity: 275 US t / 230 t

    Long, powerful and versatile – high lifting capacity for great hoist heights.

  • Maximum height: 364 ft / 111 m

    With a 246 ft / 75 metre telescopic boom and a 141 ft / 43 metre fixed jib for working with the boom fully raised and a great hook height.

  • Hoist more: VarioBase® Plus

    New support technology opens the way for even higher lifting capacities.

  • Economical and flexible: VarioBallast®

    High lifting capacities at large radii.

  • Green: ECOdrive

    Save fuel and reduce noise using enhanced travel drive tuning.

LTM 1230-5.1

Our crane experts made the multi-award-winning VarioBase® support technology the focal point of the structural steel design for this crane. This means that the LTM 1230-5.1 is the first to have an asymmetrical support base. VarioBase® means that it is now possible to generate particularly high lifting capacities, particularly at the rear working area, over the supports – calculated in real-time by the LICCON controller. VarioBase® Plus is the combination of VarioBase and an asymmetrical support base. Furthermore, the LTM 1230-5.1 has an extremely long telescopic boom. And it also sets new standards in terms of lifting capacity. With lattice extensions, the maximum hook height has been increased by around 10 percent compared to its predecessor. The 5-axle mobile crane is therefore ideal for working with the boom fully raised and at large hook heights, for example for erecting tower cranes or maintenance work for wind turbines.

Max. load capacity 230 t
Telescopic boom 75 m
Max. hoist height 111 m
Max. radius 86 m
Number of axles 5

Technical data

Max. load capacity 230 t
at radius 3.00 m
Telescopic boom from 12.70 m
Telescopic boom up to 75.00 m
Lattice jib from 3.4 m
Lattice jib up to 43.0 m
Drive engine/make Liebherr
Drive engine 6-Zylinder-Diesel
Drive engine/power 400 kW
Number of axles 5
Drive/Steering standard 10 x 6 x 10
Drive/Steering option 10 x 8 x 10
Driving speed 85.00 km/h
Total ballast 72.00 t

Downloads

Technology

VarioBase® Plus

VarioBase® Plus

The combination of VarioBase technology and the crane’s structural steelwork. A trapezoidal support combined with the various support base delivers even higher lifting capacities, particularly over the crane’s rear outriggers.

ECOdrive

ECOdrive

ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.

Single-engine concept

Single-engine concept

Take one engine out to increase lifting capacity. Or more accurately – the superstructure is powered by the undercarriage engine. Gear shafts are routed from the distributor gear in the substructure via two mitre gears to the pump distributor gear in the superstructure. That enables us to remove one engine – and we use this to increase the crane’s lifting capacity.

ECOmode

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The LICCON 2 control system calculates the perfect engine speed for the diesel engine.

VarioBallast® (mechanical)

VarioBallast® (mechanical)

Mechanically slewing ballasting cylinders enable the ballast radius to be changed quickly to two different settings. The smaller radius is used in constricted conditions whilst the larger one is used if a higher lifting capacity is required. This significantly increases the crane’s flexibility.

Videos

Long, powerful and versatile

Long, powerful and versatile

Call up video

The mobile crane redesigned:

A new 5-axle crane was unveiled at the Customer Days 2018 – the LTM 1230-5.1 is extremely versatile, powerful, safe and efficient. And it has a surprising structural steel design.

Find out more

Premiere with an Alpine:

The era of one of the most successful crane models ever produced at the Liebherr plant in Ehingen is coming to an end. The thousandth LTM 1200-5.1 mobile crane recently left the crane factory. However, its successor is already conquering construction sites around the world – the Liebherr LTM 1230-5.1. The very first one went into the Swiss Alps.

Find out more