Please choose your range
Close

Hydraulic cylinder 260 bar series-production range

Can be adapted for mobile and stationary applications

Configure now

The production range at a glance

The hydraulic cylinder 260 bar series-production range from Liebherr offers cost-effective cylinder solutions for demanding operating conditions. The hydraulic cylinders can be configured with different types of mounting, oil connections and piston rod coatings. It thus provides the necessary flexibility for applications in which no extensive additional requirements, e.g. for sensors, are placed on the cylinder.

Wide variety of variants

The series-production range offers 28 basic piston-piston rod rated diameter combination variants.

Applications

The hydraulic cylinders of the 260 bar series-production range can be used in both mobile and stationary applications.

Worldwide service network

Enjoy the worldwide service network of the Liebherr Group.

    
        

Product range at a glance

Table is scrollable
Type Differential cylinders
Stroke lengths Up to 3,100 mm, larger lengths on request
Piston diameter 90 - 230 mm
Piston rod diameter 50 - 150 mm
        
    

For use anywhere

The hydraulic cylinders of the 260 bar series-production range are very robust against static and dynamic loads. This makes the cylinders suitable for a wide range of mobile and stationary applications. Construction machines are also among the target applications, such as mobile work platforms, presses and various other industrial machines.

The hydraulic cylinder series-production range can be used in telescopic loaders and crawler tractors. See for yourself.

    
        
  • Hoist cylinders

  • Rear rippers

  • Hoist cylinders

        
    


    

Technical designs to fit your needs

The hydraulic cylinders are calculated and built according to current state-of-the-art procedures. For example, the finite element method supports the design of the builds. Supportive pulse and endurance tests are also carried out to check the calculations. Four types of attachment and two alternative oil connections are available for each piston rod and piston combination. Depending on the environmental conditions, single-chrome or double-chrome coating is used for the piston rod. Functional extensions such as sensor or cushioning solutions were deliberately avoided during the design in order to be able to realize the most economical solution for the respective target application.

  • Coating
  • Seals
  • Mounting types
  • Media connections

Coating

The standard coating is a high-quality single chromium layer with a thickness of 25 μm (± 5 μm). For higher corrosion or impact protection requirements, a hardened piston rod with double chrome coating is available. This coating ensures a minimum of 96 hours in the acetic acid salt spray test (AASS) according to DIN EN ISO 9227 rating 10.

Seals

Seals are very important for the reliability of hydraulic cylinders. With a compact sealing arrangement and an innovative sealing system, Liebherr also meets the highest of demands with this series. Only high quality, low-friction gaskets are used by default. The rod seal also uses a proven tandem sealing system consisting of primary and secondary seals.

Mounting types

To be compatible with the wide variety of hydraulic cylinder installation situations, the 260 bar series-production range has four possible types of mounting: Swivel eye on the bottom side (MP3), joint eye on the bottom side (MP5), round flange on the head side (MF3) and pivot pin mounting (MT4). A thread is used for connection to the piston rod. Optionally, a suitable joint head can also be pre-assembled.

Media connections

Depending on the customer's requirements, the oil connection can be made in the 260 bar series-production range using an inch-sized or a metric threaded connection.

    

Product configurator

Unique on demand: Your custom hydraulic cylinder is just a few clicks away.
Konfigurator_Mockup

Other topics that may interest you

Unique on demand - Now you can configure your own custom hydraulic cylinder from our series production ranges.

To configurator

The intelligent hydraulic cylinders of the series-production range according to ISO 6022 are used in many industrial applications.

Discover now

The robust hydraulic cylinders of the 380 bar series-production range are mainly used in mobile applications.

Find out more

Discover lightweight construction solutions made of fibre composite materials such as carbon-fibre reinforced plastic (CFRP).

More information
  • 0
    Wish list
    The product was added to your wish list.
  • 0 Compare list
    Select at least one other product to start the comparison. You can only compare a maximum of 7 products per list. Remove products from the list or reset the list. You can only manage a maximum of 7 different compare lists at the same time. The product was successfully added.
    Start comparison
    Your compare list is empty. You can select products to compare on the product pages.
Your wish list includes:
Recently added: Your wish list does not contain any products.
close