![LR 1700-1.0 - Blending worlds, merging types [m/t]](/external/products/products-assets/c16da850-b19b-4317-b384-d15bfb05ff37-8_Thumbnail/IMG_110x156/liebherr-283-lr-1700-1.0-td-283-02-defisr12-2021.jpg)
You are here
Liebherr Group: Products & Services for Czech Republic
Other websites for Czech Republic
LR 1700-1.0
Crawler crane
-
Leader
With its outstanding lifting capacities, the LR 1700-1.0 is the very best in the 600 – 750 t class.
-
High into the sky
The boom can be raised to a maximum 198 m – 102 m main boom and 96 m luffing jib.
-
Modern derrick system
The LR 1700-1.0 features the newest innovations such as the V-Frame® system and the VarioTray detachable ballast system.
-
Economical transport
All the transport units for the base machine, including the pivot section, measure below 3 m in width.
-
Powerful base machine
A new base machine with completely revised static calculations delivers 10 – 15 % more lifting capacity.
-
Reusable
Lots of time-tested components can be taken from the LR 1600/2.
LR 1700-1.0 - Blending worlds, merging types.
Our new LR 1700-1.0 combines the benefits of the low cost transport of 600 tonne (660 USt) class crawler cranes with the performance of 750 tonne (825 USt) class lattice boom cranes. It also features all the innovations of Liebherr’s crawler crane developments from the last few years. The LR 1700-1.0 was designed on the basis of the dimensions of the LR 1600/2 – but with significantly more lifting capacity. A large number of components from the LR 1600/2 can be used for the LR 1700-1.0. The basis of the high performance of the LR 1700-1.0 is the new base machine, whose static structure has been completely redesigned to deliver up to 15 percent more lifting capacity. The structural steelwork for the crawler carriers has been made particularly robust and the size of the rollers increased to minimise wear when moving on the crawler travel gear. The 4-way drive for the travel gear is standard. The modern derrick system has V-frame®, VarioTray® and the new “M-Wagon®” modular ballast trailer. In addition to the LR 1700-1.0, this can also be used for the LR 1800-1.0 and the LR 11000.
Max. load capacity
700 t
Max. hoist height
196 m
Max. radius
160 m
What's inside
-
Leader:
With its outstanding lifting capacities, the LR 1700-1.0 is the very best in the 600 – 750 t / 660 – 825 USt class.
-
High into the sky:
The boom can be raised to a maximum 198 m / 650 ft – 102 m / 335 ft main boom and 96 m / 315 ft luffing jib.
-
The very latest derrick system:
The LR 1700-1.0 features the newest innovations such as the V-Frame® system and the VarioTray® detachable ballast system.
-
Reduced transport cost:
All the transport units for the base machine, including the pivot section, measure below 3 m / 9 ft 10 in in width.
-
Revised base machine:
A new base machine with completely revised static calculations delivers 10 – 15 % more lifting capacity.
-
Don’t waste it – reuse it:
Lots of time-tested components can be taken from the LR 1600/2.
Photo gallery
| Max. load capacity | 700 t |
|---|---|
| at radius | 8.50 m |
| Main boom, lightweight/heavyweight from | 30 m |
| Main boom, lightweight/heavyweight up to | 165 m |
| Max. load torque | 9,650 tm |
| Lattice jib from | 12.00 m |
| Lattice jib up to | 96.00 m |
| Derrick boom | 42.0 m |
| Central ballast | 90 t |
| Counterweight at superstructure | 230 t |
| Derrick ballast | 375 t |
| Engine power | 400 kW |
| Driving speed | 1.20 km/h |
M-Wagon®
Boom/jib combinations
Transportation plan
Transportation plan
Transportation plan
WindSpeed load charts
Increased flexibility and safety by using lifting capacity tables with different maximum wind speeds.
M-Wagon®
Ballast wagon for relocating the crane with and without a load – without ballast handling! The M-Wagon® can be used with several crane models and can be interchanged as required.
V-Frame®
Maximum flexibility in derrick mode with enormous adjustment distances for the ballast guide from minimum to maximum derrick ballast radius. The folding V-frame® makes it possible.
VarioTray®
Small ballast pallet for quickly removing a small part of the derrick ballast. Ideal if lots of ballast is required to erect the boom system but a smaller amount is required for the hoisting work. The VarioTray can be unpinned very quickly using just four pins.
HVO ready
Up to 90 % lower CO2 emissions in action.
LR 1700-1.0 - First use in wind power
Call up video
MyLiebherr
Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes
