LRT 1100-2.1

Rough terrain crane

Standard width crane cabin

The standard width crane cabin can be tilted backwards to provide a better viewing angle of the load.
VarioBase®

VarioBase® support technology delivers higher lifting capacities and also ensures maximum operational safety.
Full monitoring

The crane monitors the outriggers, the ballast installation and the installation of the optional double folding jib with angle adjustment.
Simple telescoping

Simple telescoping with telematics and two fixed telescoping paths.
Worldwide safety standard

Global uniform safety standard which complies with all current regulations – ASME B30.5, EN 13000, Australian Standards (AS) and GOST standard.

LRT 1100-2.1 – The safe choice!

During the design of the LRT 1100-2.1 rough-terrain crane, our engineers focused on one specific criterion – safety. For both the crane operator and surrounding area. For example, the rough-terrain crane has outrigger monitors as standard. The support status is detected automatically and saved to the crane controller. The standard VarioBase® variable support base also enhances safety. It enhances flexibility on site and also increases the crane’s lifting capacity. The LRT 1100-2.1 has a telescopic boom with Liebherr’s time-tested telematic telescoping system for rough-terrain cranes, on which the various telescoping sections can be extended independently with a single cylinder and then pinned to the telescopic section above. This system is particularly simple and user-friendly, as excellent lifting capacities over the entire radius range can be achieved with just two telescoping modes, power or length.

Metric Imperial

Max. load capacity 100 t

Telescopic boom 50 m

Max. hoist height 69 m

Max. radius 54 m

Number of axles 2

Rough terrain cranes

What's inside

Safety for the operator:

The standard width crane cabin can be tilted backwards to provide a better viewing angle of the load.
Safe, variable support:

VarioBase® support technology delivers higher lifting capacities and also ensures maximum operational safety.
Fully monitored:

The crane monitors the outriggers, the ballast installation and the installation of the optional double folding jib with angle adjustment.
Strong or Long:

Simple telescoping with telematics and two fixed telescoping paths.
Worldwide safety standard:

Global uniform safety standard which complies with all current regulations – ASME B30.5, EN 13000, Australian Standards (AS) and GOST standard.

Photo gallery

Technical data

Max. load capacity	100 t
at radius	2.50 m
Telescopic boom from	12.60 m
Telescopic boom up to	50.00 m
Lattice jib from	2.00 m
Lattice jib up to	19.00 m
Drive engine/make	Cummins
Drive engine	6-Zylinder-Diesel
Drive engine/power	188 kW
Number of axles	2
Drive/Steering standard	4 x 4 x 4
Driving speed	25.00 km/h
Total ballast	15.00 t

Downloads

Technical Data LRT 1100-2.1 [m/t]

PDF (7.4 MB)

Boom/jib combinations

Driving conditions

Jobsite driving

Technology

ECOmode

ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The crane control system calculates the perfect engine speed for the diesel engine.

VarioBase®

VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.

SafetyChart

Worldwide safety standard: Global uniform safety standard which complies with all current regulations – ASME B30.5, EN 13000, Astralian Standards (AS) and GOST standard.

HVO ready

Up to 90 % lower CO2 emissions in action.

Videos

MyLiebherr

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes

MyLiebherr