Additional devices for automation systems

Extensive range of modules

To set-up production lines to solve complex tasks, Liebherr supplies not only basic components but also all of the requisite additional equipment.

Additional equipment from one source

With the additional equipment, too, Liebherr draws on an extensive range of modules. Among these, for example, are lettering, recognition by means of camera systems and the discharge of measuring parts.

Labelling systems

With the high quality labelling systems offered by Liebherr, digital combinations or codes can be lasered, etched or engraved with needles on the workpiece.

Centrifugal station

To prevent the displacement or mixing of cooling lubricants, it is necessary for the workpieces to be cleaned automatically. Depending on the needs of the customer and the workpiece, different processes are employed. The most common processes are: discharge, vacuum or blow-off stations.

Statistical process control (SPC)

The static process control is a fixed element of any production line in modern production systems. Liebherr supplies these modular-based stations for discharge and inclusion.

Decoupling module

The storage solution for manufacturing systems

Workpieces are placed on pallets in the decoupling module and are made available to gantry or robot systems via pull-out mechanisms to allow loading and unloading. A manual loading and unloading drawer for gauge parts can be integrated if needed. The integrated control system with standardized Liebherr software facilitates commissioning and enables simple retrofitting in a manufacturing line.