Mobile and crawler cranes
Other product segments
Israel (en)
LTM 1150-5.4E

Mobile crane

LTM 1150-5.4E – Zero emission, full power.

Based on our LTM 1150-5.4, we have given this all-terrain crane a hybrid drive. The LTM 1150-5.4E has an electric drive, which allows crane movements to be carried out CO2-emission-free and with reduced noise emissions. With its integrated battery, the crane can work autonomously for up to four hours without a power connection. On the other hand, a low electric grid connection on the job site is sufficient to develop the full crane performance - as the battery serves as an efficient buffer. Our LTM 1150-5.4E therefore meets the requirements of "zero emission construction sites", combines sustainability with maximum efficiency and comes with numerous pioneering technologies on board.

  • Max. load capacity - 150 t

  • Telescopic boom - 66 m

  • Max. hoist height - 92 m

  • Max. radius - 72 m

  • Number of axles - 5

LICCON3

Zero emissions:

Zero CO2 emissions during crane operations powered by electric motor.

Full power:

Comparable performance during crane operations, regardless of whether it is powered by electric motor or combustion engine.

Simply quiet:

Noise emissions during crane operations powered by the electric motor are significantly reduced.

It couldn’t be simpler:

Maximum flexibility thanks to quick changes between diesel-hydraulic and electro-hydraulic power.

Supplied from the site:

Unlimited working is possible in plug-in mode.

Crane operations with a battery pack:

Battery to reduce the connected load and for autonomous operation of the superstructure.

Photo gallery

Technical data

Max. load capacity
150 t
at radius
3.00 m
Telescopic boom from
12.30 m
Telescopic boom up to
66.00 m
Lattice jib from
2.90 m
Lattice jib up to
26.00 m
Drive engine/make
Liebherr
Drive engine
6-Zylinder-Diesel
Drive engine/power
400 kW
Number of axles
5
Drive/Steering standard
10 x 6 x 10
Drive/Steering option
10 x 8 x 10
Driving speed
85.00 km/h
Total ballast
45.00 t

Downloads

Technical Data - Mobile crane LTM 1150-5.4E [m/t]

PDF (4.1 MB)

Technology

ECOmode
ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The crane control system calculates the perfect engine speed for the diesel engine.
ECOdrive
ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.
Single-engine concept
Take one engine out to increase lifting capacity. Or more accurately – the superstructure is powered by the undercarriage engine. Gear shafts are routed from the distributor gear in the substructure via two mitre gears to the pump distributor gear in the superstructure. That enables us to remove one engine – and we use this to increase the crane’s lifting capacity.
Hillstart-Aid
Hillstart-Aid makes starting on gradients easier. Move off safely and easily without rolling backwards.
RemoteDrive
The RemoteDrive remote control enables the crane to be controlled from outside the driver’s cabin. This is not only possible during crane operations, but also whilst driving on the site. This delivers greater safety and comfort as the crane operator has a better view of problem areas as he can be right next to them. In other words, the operator can move himself to the areas with difficult access.
LICCON3
The third generation LICCON control system features the same time-tested operation as previous generations and adds a fast data bus, significantly more storage space and greater computing power. LICCON3 cranes are prepared for telematics and fleet management.

MyLiebherr

Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes

LTM 1150-5.4E

LICCON3