The service life of the "Zero-G" parabolic aircraft came to an end with a spectacular hoist over the fence at Cologne-Bonn Airport. The heavy load experts from Riga Mainz hoisted the 82-tonne Airbus A-300 from the airport's apron using a Liebherr LR 1600/2 crawler crane and a sophisticated combination of attachment equipment. The aircraft will now become a museum exhibit on show to the general public.
Both the specifications for the crane job at the airport, such as its limited set-up height, and the requirements for attaching the sensitive load were very stringent. In fact there are only three attachment points on the entire aircraft with the required load capacity – both main sets of landing gear and an area at the front of the Airbus' fuselage.
The attachment equipment weighed a total of 19 tonnes and included two cross beams and three load spreaders developed by Riga Mainz. A remote controlled chain hoist was used to adjust the crane hook precisely over the overall centre of gravity, even when it was loaded. This made it possible to adjust the required angle of the aircraft to the horizontal to generate no upthrust in the event of wind and inflows from the front. This solution satisfied a major requirement specified by the customer.
"Zero-G" required around one hour for its last "flight" over the airport security fence. The Airbus, which measures around 54 metres in length, was turned almost imperceptibly slowly into its final position. The LR 1600/2 with its curious load then covered a distance of around 20 metres on a specially laid gravel bed.
Placing the future museum exhibit on three foundation points proved to be something of a long-winded procedure. Minor corrections had to be made to the construction before the crane driver Markus Knabe was able to position his unusual load with millimetre precision. Airport manager Michael Garvens did not hold back with his praise after the job had been successfully completed: "Absolute precision work and a great result."
You might also be interested in
30/09/2026
Press releases
Permit-free from south to north: new Liebherr LTM 1055-3.3 mobile crane for Schlamann-Autokrane GmbH
The LTM 1055-3.3 is the second of four new Liebherr mobile cranes ordered by Schlamann-Autokrane GmbH this year. The new 55-tonne crane is the lightest 3-axle all-terrain crane on the market: it travelled from the Liebherr plant in Ehingen, Upper Swabia, to Nienburg in Lower Saxony without the need for complex authorisation procedures.
29/09/2026
Press releases
Game of Cranes returns: Liebherr is looking for the world’s best mobile crane operator
Following its successful debut last year, Game of Cranes is returning: companies from around the world can once again nominate their best crane operators. Participants will demonstrate precision, dexterity and nerves of steel in a series of demanding challenges. Community voting, evaluation by a Liebherr expert panel and five regional qualifying rounds will pave the way to the grand final in Ehingen in 2027.
25/09/2026
Press releases
Against the impressive backdrop of Paris city centre, a Liebherr MK 88-4.1 mobile construction crane from the Ponticelli group of companies mastered an extraordinary task.