LP11.5
Common rail high pressure pump
The LP11.5 common-rail high-pressure pump is designed for use in large diesel engines, including applications in mining, power generation, marine and rail. The oil-lubricated design supports reliable operation and, depending on the system design and operating conditions, can contribute to a long service life. A small difference between mean and peak torque can support the design of the gear train and help reduce noise emissions. The LP11.5 high-pressure pump meets DNV certification standards for marine applications.
System pressure - 100 - 2,200 bar
100 - 2,200 bar
Flow rate - 810 l/h
810 l/h
Max. speed - 5,000 rpm
5,000 rpm
Lubrication - oil
oil
Service life off-highway - 15,000 h
15,000 h
Highlights
Oil-lubricated
Extremely robust against aggressive fuels
Up to four connector possibilities for high / low pressure lines
TA Luft, US EPA Tier 4f, IMO III compatible
Technical data
| System pressure | 100 - 2,200 bar |
| Flow rate | 810 l/h |
| Rated speed | 4,500 rpm |
| Max. speed | 5,000 rpm |
| Drive concept | Eccentric roller |
| Number of plungers | 5 |
| Lubrication | oil |
| Weight | 55 kg |
| Service life off-highway | 15,000 h |
| Oil in fuel | <0.02 g/kWh |
| PCV | electrically controlled with mechanical overpressure safety |
| VCV | volume control valve currentless open |
| Feed pump | Mechanical (G-rotor) |
| Mean torque at max. system pressure and max. flow rate | 135 Nm |
| Ambient temperature | -30 to 125 °C |
| Vibration specification | ISO 10816-6 / VDI 3838 |
| Filtration specification | min. 99.2% efficiency @ 4 µm (ISO 19438) - along service life |
| Fuel specification | Purity class 12/9/6 (ISO 4406) |



