Kran Saller GmbH based in Deggendorf in Bavaria, recently erected five wind turbines in five weeks at a wind farm in Dagebüll, Germany, near the Danish border.
The LTM 1750-9.1, which Saller took delivery of at the Liebherr plant in Ehingen in summer 2014, has already excelled on many occasions with its high capacity and efficiency for the erection of wind turbines. A few weeks ago the 9-axle mobile crane from Bavaria travelled to Northern Friesland to a wind farm in Dagebüll. Once there, within just five weeks it had erected five wind turbines manufactured by Senvion, each with a capacity of 3.4 MW. Seven components had to be installed on each turbine. The heaviest component at 61 tonnes net weight was the rotor star which had to be installed at a hub height of 80 metres. The LTM 1750-9.1 hoisted this load to a hook height of 90 metres with a radius of 20.5 metres. To tackle this job the 750-tonne mobile crane was equipped with telescopic boom guying, a 15-metre V2 telescopic boom extension, a 35-metre luffing jib and 144 tonnes of ballast.
함께 읽으면 좋은 글
2026. 10. 13.
Press releases
Boosting performance for wind power expansion: Gertzen retrofits the LR 1800-1.0 with the X3 system
Gertzen Kranlogistik GmbH & Co. KG has retrofitted its Liebherr LR 1800-1.0 crawler crane with the X3 boom system. With this upgrade, the company is significantly expanding its range of services in the wind energy sector.
2026. 10. 08.
Press releases
THW builds Danube bridge using four Liebherr LTC 1050-3.1 cranes
In Tuttlingen, southern Germany, four small Liebherr cranes have achieved great things: as a temporary replacement for a Danube bridge due for demolition, the LTC 1050-3.1 compact cranes erected a 70-metre-long river crossing as part of a civil defence exercise.
2026. 10. 07.
Press releases
Replacing the European Parliament’s air-conditioning system in Luxembourg required a long reach, precise planning and meticulously coordinated logistics. A Liebherr LTM 1650-8.1 mobile crane from STEIL Kranarbeiten in Trier lifted six old components from the roof and installed the new units.