The new 1000 EC-B 125 Litronic was recently used to erect an Enercon wind turbine in Wardenburg in the Rural District of Oldenburg. With a lifting capacity of 125 tonnes, this Flat-Top crane is the largest crane in the Liebherr Tower Cranes Division product range. First unveiled at the Bauma 2013, the largest trade fair for construction machinery in the world, the crane attracted a great deal of interest.
The 1000 EC-B was first used in North Germany. Near Oldenburg, in Wardenburg, the Flat-Top crane was used to erect a new Enercon E-101 wind turbine with a hub height of 135 m. Customers have recently reported good experience with erecting wind turbines using the 630 EC-H 70 Litronic crane which has been adapted to this application. Liebherr tower cranes have already erected a very large number of wind turbines.
The lifting capacity of the new crane is 125 t in the six-line version or 100 t in the four-line version. The Flat-Top crane can reach the required lifting height of 149 m for the project with a single guy on the tower of the wind turbine. It can operate in free-standing mode for such projects up to a lifting height of 108 m.
함께 읽으면 좋은 글
2026. 10. 13.
Listicles
7 projects that show how varied Tower Crane Solutions projects are around the globe
From the basilica in Barcelona to the airport in Santiago de Chile. The Liebherr Tower Crane Solutions (TCS) department has been involved in some of the world’s most demanding construction projects in recent years. Seven examples show how varied these projects can be around the globe. What all the projects have in common is that they call for individual crane concepts and close collaboration with customers.
2026. 10. 08.
Press releases
Three Liebherr flat-top cranes support the transformation of Milan's Bovisa gasometers
Two early twentieth century gasometers in the Bovisa district of Milan are being redeveloped into a new innovation campus for Politecnico di Milano, based on a master plan by architect Renzo Piano. Since March 2025, three Liebherr flat-top cranes have covered the entire construction site, handling lifting and material handling work across the project.
2026. 10. 02.
Listicles
More experience, more confidence: six questions on the new period of use for Liebherr fibre ropes
Liebherr is increasing the period of use of its fibre ropes to up to 12 years in temperate climates and up to 8 years in hot climates, while the overall service life is rising from 14 to 16 years. But what's behind this decision, and why do all ropes already in the field benefit too? Six questions for Jochen Huber, Product Manager Fibre Technology at Liebherr, on the tests, the impact for customers on site, and the wider strategy behind Fibre technology.