The container bridge on the River Rhine near Dormagen which suffered damage in storms in June 2014 has been repaired. Heavy load logistics contractor Wasel repositioned the portal crane, which measures over 100 metres in length. The demanding job took a total of two days. Five Liebherr cranes were used for the job.
Wasel based in Bergheim took charge of the reinstallation of the 109-metre long and 21-metre wide container crane using two Liebherr crawler cranes and three LTM mobile cranes. The two LR 1600/2 crawler cranes were positioned on the actual bank of the Rhine in a six-metre deep preflooder basin. Meanwhile on land an LTM 1750-9.1 and an LTM 1500-8.1 took charge of the hoisting work whilst an LTM 1220-5.2 was used for erection purposes.
Initially the projecting portal crane track was manoeuvred between the cranes using two SPMT self-propelling vehicles and auxiliary rail systems. The four Liebherr cranes then raised the 560-tonne structure in a four-way hoist and held the imposing load at a height of around 25 metres. During this process the installation teams installed the new supports and tracks to the portal crane with the 220-tonner. Finally the 35-metre high container bridge was reset on its tracks.
함께 읽으면 좋은 글
2026. 10. 13.
Press releases
Boosting performance for wind power expansion: Gertzen retrofits the LR 1800-1.0 with the X3 system
Gertzen Kranlogistik GmbH & Co. KG has retrofitted its Liebherr LR 1800-1.0 crawler crane with the X3 boom system. With this upgrade, the company is significantly expanding its range of services in the wind energy sector.
2026. 10. 08.
Press releases
THW builds Danube bridge using four Liebherr LTC 1050-3.1 cranes
In Tuttlingen, southern Germany, four small Liebherr cranes have achieved great things: as a temporary replacement for a Danube bridge due for demolition, the LTC 1050-3.1 compact cranes erected a 70-metre-long river crossing as part of a civil defence exercise.
2026. 10. 07.
Press releases
Replacing the European Parliament’s air-conditioning system in Luxembourg required a long reach, precise planning and meticulously coordinated logistics. A Liebherr LTM 1650-8.1 mobile crane from STEIL Kranarbeiten in Trier lifted six old components from the roof and installed the new units.