LRH 100.1 Piling rig (LRH series)

The piling rig LRH 100.1 has a special leader kinematics which enables very high radii and inclinations of up to 18° in all directions. Thus, a complete pile group can be installed from one location without repositioning the carrier machine. The flexible hammer system allows the use of different ram weights. With the LRH 100.1 different timber, concrete or steel piles can be produced. The LRH 100.1 is based on the approved LB 25’s basic machine of the Liebherr rotary drilling rig series.
Max. pile length 19.5 m
Max. pile weight 8 t
Leader inclination 1:3
Vertical travel device 4 m
Basic hammer weight max. 9,600 kg

Easy transportation and quick set-up

Easy transportation and quick set-up

The compact rig can be transported in one piece with the hammer mounted and is consequently ready for operation on the jobsite in a short time.

Special radii and inclination

Special radii and inclination

The flexible leader kinematics allows very large radii of up to 8 m and inclinations of up to 18° in all directions. Thus, a complete pile group can be installed from one location without repositioning the carrier machine.

Safe access

Safe access

Side platform, railings and ladders are fully integrated in the new machine design and no longer need to be removed for transport. more

Powerful drive technology

Powerful drive technology

The Liebherr-own and fuel efficient diesel engine generates the required power. In combination with the on-board hydraulics a sufficient amount of performance for various deep foundation works is provided. When using further attachments like casing oscillators, no additional power pack is needed. more

Innovative crane control

Innovative crane control

The crane control system offers a multitude of programme and control options for various piling and drilling methods. Service and machine data is also provided on color displays. The operator thus benefits from a facilitated handling of the rig. Hence, quick working cycles are achieved. more

High service availability

High service availability

A global service network with experienced technicians and fast access to spare parts ensure high machine availability and a long product service life. more

Operating weight 71.3 t
Max. winch line pull 108 kN
Max. crowd force 80 kN
Drive Conventional (diesel engine)
Engine power 250 kW
Leader inclination 1:3
Max. height 24.0 m
Max. leader lenght 19.5 m
Vertical travel device 4 m
Max. pile length 19.5 m
Max. pile weight 8 t
Jib length 8.7 m
Basic hammer weight min. 6,600 kg
Basic hammer weight max. 9,600 kg
Ram mass min. 3,000 kg
Ram mass max. 6,000 kg
Predrilling, max. drilling depth 12.0 m
Predrilling, max. torque 12 kNm
Min. transport width 3,490 mm
Min. transport height 3,400 mm
MyJobsite

MyJobsite

One single tool for the collection, documentation and analysis of all process, machine, construction site and position data. more

Recording of working processes (PDE)

Recording of working processes (PDE)

With the PDE process data recording system machine data is recorded during the working process. more

LIPOS positioning system

LIPOS positioning system

Accurate positioning and precise execution of piling or drilling processes. more

Eco silent mode

Eco silent mode

With the eco silent mode the engine speed can be reduced to a predefined, required level. With this feature a notable reduction in diesel consumption can be achieved without any impact on operational output. Noise emissions are thus also lowered.

Automatic engine stop

Automatic engine stop

The machine can optionally be equipped with an automatic engine stop control. Thanks to this feature it automatically switches off during longer work breaks after evaluating several machine parameters. This is fuel saving and environmentally friendly.

Fleet management and teleservice

Fleet management and teleservice

The data transmission and positioning system “LiDAT” provides important information on the operation of the machine. With these data the operation becomes more efficient. Various additional modules allow machine data reporting or access through service engineers via teleservice. more

Impact driving

Impact driving

Impact driving uses a hydraulic hammer for the installation of various types of pile. The hammer’s ram mass impacts on the pile. more

MyJobsite – Your work at a glance

MyJobsite – Your work at a glance

Call up video

LIPOS - Liebherr Positioning System

LIPOS - Liebherr Positioning System

Call up video

Training

Training

Call up video

Video - Automatic engine stop control explained

Video - Automatic engine stop control explained

Call up video

Video: Liebherr piling rig LRH 100 with special leader kinematics

Video: Liebherr piling rig LRH 100 with special leader kinematics

Call up video

Sales and Service

Our customers can rely on a worldwide sales and service network. Search here for the right contact partner. Find your contact person

Used machines

Do you prefer a used machine? Find construction machines persuasive by experience. Used machines

Concrete pumps

Stationary concrete pumps in conjunction with concrete distribution systems are particularly economic for use over several days. Stationary concrete pumps

Attachments

With the attachment devices developed and manufactured in-house, we consolidate our position as a full-service provider in the deep foundation industry. Attachments for piling and drilling rigs

Foundation methods

Deep foundation machines from Liebherr can be applied for all common drilling methods, for slurry wall installation and soil improvement. Methods and applications

Customer service

Our Customer Service aims to effectively help in maintaining Liebherr equipment at its best. Customer service for crawler cranes

Application technology

Our application specialists assist with the correct choice of application and the most suitable machine configuration. Application technology

Digital solutions

We offer a number of IT solutions, which provide substantial support for all those involved in the construction site. Digital solutions