01/19/2016 Liebherr and Teufelberger develop a high-strength fibre rope for crane operation

  • New development for tower cranes, mobile and crawler cranes, as well as maritime cranes from Liebherr
  • Field tests are currently being conducted on different Liebherr cranes
  • The discarding state of the fibre rope is easy and safely identifiable

Together with the Austrian rope manufacturer Teufelberger Holding AG, Liebherr is developing a new type of high-strength fibre rope for hoisting operations. This project is based on a systematic cooperative venture between Liebherr engineers from various divisions, including Liebherr-Components Biberach GmbH, as well as the three Liebherr manufacturing plants for tower cranes, mobile and crawler cranes and maritime cranes.

The high-strength fibre ropes are being subjected to intensive testing at the rope test bench of Liebherr-Components Biberach GmbH.

The high-strength fibre ropes are being subjected to intensive testing at the rope test bench of Liebherr-Components Biberach GmbH.

The practical requirements of cranes with increasingly higher hoisting heights and maximum load capacities require a realignment in the rope and crane design. The high-strength fibre rope developed after many years of collaborative work between Liebherr and Teufelberger is based on the vast experience of Liebherr in rope applications and winch technology for multi layer spooling and the in-depth know-how of Teufelberger in the development and manufacture of fibre and steel ropes.

The use of high-strength fibre ropes offers huge potential. In comparison to steel ropes, the newly developed rope is significantly lighter and is more durable. The load capacities of the cranes can be increased thanks to the reduced weight of the rope, which also allows to reduce the mass of the hook block significantly. In addition, the ropes no longer need to be lubricated.

Reduced weight of rope increases load capacities of cranes

The weight of the high-strength fibre rope is up to 80% less in comparison to a steel rope. This saving can be reallocated directly to the load being lifted. It is also possible to use lighter load hooks. The load capacities of the cranes are thus further increased.

Another advantage is the simplified assembly and disassembly of the crane thanks to the reduced weight of the rope. Fibre ropes can often be mounted on the crane by hand and without any reeving winches. Reeving around the hook block is also quicker and easier.

Field tests are being conducted for the high-strength fibre rope from Liebherr and Teufelberger on the LR 1200 crawler crane.

Field tests are being conducted for the high-strength fibre rope from Liebherr and Teufelberger on the LR 1200 crawler crane.

Long service life improves crane availability

The high-strength fibre rope developed by Liebherr and Teufelberger is extremely wear-resistant and permits a high number of bending cycles. It lasts much longer in comparison to the steel rope. The higher service life can reduce the number of rope changes.

The crane operator is able to easily and safely identify when the rope needs to be changed. Liebherr adopts a redundancy strategy here, in order to be able to easily recognise the discarding state for all rope constellations and applications through the entire service life. The discarding state is mainly identified when the coat of the rope is clearly worn and the wear indicates that the rope is ready to be discarded.

The fibre rope developed by Liebherr and Teufelberger can cut in the lower layers repeatedly without causing damage. The winding pattern of the new fibre rope is comparable to the winding of a steel rope. If the lower layers are preloaded less than the upper layers, the new fibre rope behaves however more tolerant than the steel rope. In the case of cutting in the lower layers, it frees itself, unlike steel ropes that usually interlock.

In order to achieve controlled wear of the fibre rope, Liebherr relied on the proven Lebus spooling system. A proper winding pattern at the rope drum minimises wear and increases the service life.

En route to practical application

Liebherr is currently testing the new high-strength fibre rope. Firstly, various crane applications are being simulated at the rope test bench in Biberach / Riss (Germany). Since September 2015 field tests have been carried out on various cranes of Liebherr-Werk Ehingen GmbH, Liebherr-Werk Nenzing GmbH and Liebherr-Werk Biberach GmbH.

The high-strength fibre rope will be launched on the market in two stages. Initially the steel ropes of tower cranes, mobile and crawler cranes, as well as maritime cranes, will be replaced with high-strength fibre ropes. In the second stage, with mobile cranes, for example, the weight saved at the hoist rope is used to reinforce the supporting structure. This permits a further increase in the load capacity.

At Bauma 2016 Liebherr will present the new development in a technology pavilion at its outdoor exhibition stand. The exhibit of the LR 1100 crawler crane will also be equipped with a high-strength fibre rope. Rope drums with fibre rope will also be showcased for the LTM 1750-9.1 mobile crane and the 172 EC-B 8 tower crane.

Downloads

Here you will find the press release and images for download.

Contact person

Daniela Stoll

Liebherr-International Deutschland GmbH

Hans-Liebherr-Straße 45

88400 Biberach an der Riß

Germany

  • Phone+49 7351 41-4182
  • Fax+49 7351 41-2292