Press releases | 08/15/2017 The tallest wind turbines in the world: Max Bögl erects modern energy storage unit using Liebherr mobile crane

  • Mobile crane builds 40-metre high active basins for energy storage project
  • All the crane work is being completed by Liebherr machines
  • The tallest wind turbines in the world are being erected with a total height of over 240 metres

The tallest wind turbines in the world are currently being erected near Schwäbisch Hall in the north-east of Baden-Württemberg. The Max Bögl Group is erecting four turbines with a total height of 240 metres which will stand on enormous water basins. The system will be able to generate additional electricity when demand is high through its combination with a pump accumulator power plant in nearby Kocher Valley. A Liebherr mobile crane has now erected the 40-metre high active basins.

Water tower and foundation in one: the so-called active basin for the future energy storage system will be forty metres high. That will make the wind turbines on top of it the tallest in the world.

Single image, web (174 KB)

Impressive crane power: a bird's eye view of the Y-guying to increase the lifting capacity, a massive 202 tonnes of turntable ballast and the large support base of the mobile crane.

Single image, web (180 KB)

The water basins and the 40-metre high tower foundations for the wind turbines are used as water storage facilities. Furthermore, the rotors of the turbines reach up to higher air layers where there is a greater chance of beneficial wind conditions. Currently the active basins consisting of 27 prestressed concrete rings are being constructed on which the wind turbines will then be erected. An LTM 11200-9.1 from Max Bögl is being used for this job. Fitted with 202 tonnes of ballast, the mobile crane is hoisting the massive components onto each other. The nine-axle crane is handling a load of over 90 tonnes for this purpose.

Tower segments are stressed on site

The enormous concrete rings are supplied in four individual segments which are assembled on site and stressed using steel cables. The finished component has a diameter of 16 metres and is 1.5 metres high.

The Liebherr LTM 11200-9.1 (the Max Bögl Group has four cranes of this type in its fleet) will then also place some of the turbine towers on the 40-metre high reservoir and will also assemble the Liebherr 630 EC-H 70 top-slewing crane required to complete the job on the reservoir tower. This self-climbing construction crane will reach a hook height of around 190 metres above the ground. The four wind turbines in Gaildorf are due to go onto the grid before the end of 2017 whilst the pump accumulator system is to go into service at the end of 2018 at the latest.

Downloads

Here you will find the press release and images for download.

Presseinformation Deutsch PDF (27 KB)
Press Information English PDF (26 KB)

Contact

Wolfgang Beringer

Marketing and Communication


Liebherr-Werk Ehingen GmbH

Dr.-Hans-Liebherr-Straße 1

89584 Ehingen

Germany