You are hereLiebherr Group: Products & Services for Portugal
Kelly drilling belongs to the most common dry rotary drilling methods and is used for the production of bored piles with a large diameter (from a size of approx. 500 mm). The process is suitable for nearly all types of soil and rock. The soil is conveyed with relatively short rotary drilling tools, such as augers, core barrels, buckets and special drilling tools. A typical element of this drilling method is the drill rod, the so-called Kelly bar, which is telescopic and facilitates large drilling depths.
1. Installing the protective pile
2. Emptying, e.g. with an auger
3. Inserting the reinforcement
5. Finished pile
The video shows Liebherr drilling rigs in different Kelly drilling applications.
When the soil is insufficiently solid or in case of groundwater ingress boreholes must be produced using a casing.
Solid, dry building ground allows borehole installation without a casing.
For diverse soil conditions augers, core barrels, buckets and special drilling tools are used.
For drilling work with restricted headroom special short leaders are available.
When the torque of the rotary drive is insufficient, hydraulic casing oscillators are applied.
Alternate rotating and shaking of the auger on the surface removes the loosened soil from the auger.
After the borehole has been produced the reinforcement cage is lifted into the borehole using the auxiliary winch of the drilling rig.
Immediately after the reinforcement cage has been inserted the borehole is filled with concrete.
Foundation piles for the new Neckartal bridge at Heilbronn (GE).
The 130 year old bridge needs to be renovated.
Expansion of the Federseeklinik in Bad Buchau (GE).
New roundabout with two bridges over the motorway.
A luxury resort is being built at the bay of Kotor in Montenegro.
Further berths for cruise ships ath the Port of Split.
This product is not available in the selected range. Change the range to delete the product separately from your wish list.