• Highest wearing protection
    Abrasive materials know no mercy. The majority of our sensors are equipped with zirconium oxide ceramic washers and can therefore be used for longer in extreme conditions. Optionally, our sensors are available with a 10 mm thick washer.

    Highest wearing protection

    Abrasive materials know no mercy. The majority of our sensors are equipped with zirconium oxide ceramic washers and can therefore be used for longer in extreme conditions. Optionally, our sensors are available with a 10 mm thick washer.

  • Sensors in use with salt and acid
    To determine the moisture content in saline and acidic materials, we use our sensor in special design with the material 1.4462.

    Sensors in use with salt and acid

    To determine the moisture content in saline and acidic materials, we use our sensor in special design with the material 1.4462.

  • Concentration determination on the test stand
    Liebherr sensors in use for monitoring the water separation ability in diesel fuel filters.

    Concentration determination on the test stand

    Liebherr sensors in use for monitoring the water separation ability in diesel fuel filters.

  • Accessories and options
    The product range includes various accessories such as sliding shoe carriages, sensor mounting materials such as clamping flanges and weld-on fittings, funnels for rapid moisture determination in the laboratory and sensors for use in explosion-protected areas.

    Accessories and options

    The product range includes various accessories such as sliding shoe carriages, sensor mounting materials such as clamping flanges and weld-on fittings, funnels for rapid moisture determination in the laboratory and sensors for use in explosion-protected areas.

  • P78 sensor

    Sensor for determining the moisture in bulk solids and liquids. Also available as an EX version

    RMH12 sensor

    Sensor for determining the water content in emulsions Installation in test and laboratory stands

    P30 sensor

    Sensor for determining the moisture in bulk solids and liquids in confined installation conditions.

    P80-CAN sensor

    Plug-in sensor for installation in mobile machines. Use without evaluation and transfer module

    P78-CCS sensor

    Sensor for determining the moisture and the layer thickness or the weight per unit area in paper, textile and film webs.

    Sensors for explosion-protected areas

    Sensors for use in pipes or tanks to determine the water content in emulsions and bulk solids. Equipment categories 1 G, 2 G, 3 G, 1 D, 2 D, 3 D

    Litronic FMS II Evaluation and transfer module

    The stand-alone evaluation and transfer module is used to record and process the values measured by the sensors. If required, the measured value can be transferred in real time to a higher-level control. The convenient PC software enables fast and accurate calibration of the measured section.

    Litronic FMS IV Evaluation and transfer module

    A self-sufficient moisture measuring installation with high connectivity and many interesting possibilities. With ProfiNet technology on board, extensive signal processing and WEB-based access, we are ready for Industry 4.0.