Common Rail Systems
The innovative Common Rail Systems from Liebherr work reliably and guarantee a high level of efficiency of the engine with low fuel consumption. As a result, they enable compliance with the increasingly stricter emissions standards for diesel engines. At Bauma China 2016, two Common Rail Systems for different engine power ranges are presented.
Exhibits

Common Rail System 11.2
Liebherr has developed the Common Rail System 11.2 system for engines with a total output of 120kW up to a maximum of 1,000kW. The second generation is available as a side-feed version as well as a top-feed installation. This means customers will have a suitable system for all normal engine geometries and installation spaces.
System pressure: | 250 - 2,200 bar |
Engine power range: | 120 - 1,000 kW |
Displacement per cylinder: | 1,5 - 3 l/cyl |
Max. power per cylinder: | 70 kW |
System backflow: | < 40 ml/min at 2,200 bar |
Max. pump delivery volume: | 300 l/h at 2,200 bar and 4,000 rpm |
Injection volume 7mm nozzle: | up to 370 mg |
Injection volume 9 mm nozzle: | up to 600 mg |
Hydraulic flow rate: | 600 - 2,200 ml/30 sec |
Max. number of injections per cycle: | 5 |
Emission standards: | 97/68 EG Stage IV / USA EPA CARB Tier 4f / Euro V / Euro VI |
Engine control unit: | Liebherr ECU 3 |
Configuration: | Side feed and top feed |
Applications: | On-road and off-road |

Common Rail System 11.5
Liebherr offers the 11.5 system for large engines with an output range between 1,000kW and 5,000kW. The injectors make a maximum injection quantity of 1,200mm³ available per cycle, ensuring a reliable fuel supply to engines with a power output of up to 300kW per cylinder. Two high pressure pumps are available – the 5-cylinder in-line pump delivers 750 litres of fuel at 2,200 bar. Delivery is up to 900 litres per hour for the 6-cylinder pump.
System pressure: | 250 - 2,200 bar |
Engine power range: | 1,000 - 5,000 kW |
Displacement per cylinder: | 4 - 6 l/cyl |
Max. power per cylinder: | 240 kW/cyl |
System backflow: | < 50 ml/min at 2,200 bar |
Max. pump delivery volume: | 825 l/h |
Max. injection volume: | 1,000 mg |
Hydraulic flow rate: | 1,600 - 4,000 ml/30 sec |
Max. number of injections per cycle: | 3 |
Emission standards: | Tier 2 / TA Luft / IMO III / Tier 4 final |
Engine control unit: | Liebherr ECU 2HD / ECU 3 |
Configuration: | Top feed |
Applications: | Mining and railway applications, marine propulsion, stationary applications (GenSets) |