Press releases | 07/28/2022 170 metre office tower – Liebherr cranes involved in construction of “To‑Lyon”

  • EC-H and EC-B series cranes in Lyon, France, working on the development of a modern urban district
  • Liebherr provides the perfect concept for anchoring the cranes to advance the site timetable
  • Crane operators and service technicians travel to their workplace comfortably in the LiUP elevator

A 170 metre building, little space and heavy hoists – four Liebherr tower cranes finished in aircraft warning paintwork are helping to redevelop the Part-Dieu district in Lyon, France. High lifting capacity and a perfect concept for anchoring the cranes were the main focal points for this job for customer Vinci Construction France. Liebherr developed bespoke solutions to meet these demands.

At times, four Liebherr cranes were operating simultaneously on the site to complete various buildings, including the “To-Lyon” tower.

Single image, web (439 KB)

All the cranes feature the LiUP crane operator elevator and are finished in aircraft warning paintwork.

Single image, web (303 KB)

The 420 EC-H 16 has now dismantled the 250 EC-B 12 within a very short time so that the site can progress even further.

Single image, web (323 KB)

The cranes used for the project, which is located right next to Lyon central station, are the 420 EC-H 16, 280 EC-H 12, 280 EC-H 16 and 250 EC-B 12. The most striking building in the redevelopment of Part-Dieu is the “To‑Lyon”, a skyscraper with a height of 170 metres. On completion, the building will have a total floor area of 80,000 square metres for offices, businesses and a hotel. New buildings, more space for nature and networked mobility – these are just some of the measures that the district will use to make itself more attractive to residents and visitors.

Precision tailoring of tower and jib to the site conditions

The hook height and jib length of the top-slewing cranes were selected so that the machines can slew over each other without causing problems for each other despite the small amount of space available. This is exactly what the cranes in the ECB and EC H series were developed for because the jib length and tower heights can be tailored flexibly to the situation on a site. The jibs on the four cranes working at the site are between 30 and 65 metres in length. Their hook heights are between 47 and 194 metres.

The 420 EC-H 16 will reach a final hook height 194 metres. A stable tower system and a sophisticated concept for guying to the building are what make this enormous hook height possible for the erection of the “To-Lyon”. This is because the guying systems have different lengths as the construction work progresses. Initially longer struts will be used, and then shorter ones. The reason for this is that the crane had to be anchored at a time when the final concrete façade was not finished. This enabled the crane to be erected without jeopardising the whole site timetable.

Precise positioning of concrete and steel

The cranes are mainly being used to help install steel elements and for concreting work. Some of the loads being hoisted way more than twelve tonnes. The Micromove assistance system can be a real benefit for these hoists. Micromove enables crane operators to position heavy loads with fingertip precision and is just one of several assistance systems which are available. Litronic, Liebherr’s smart assistant, is designed to support crane operators in their work and also increase handling capacity, reliability and safety.

Using LiUP to get up to the required height at the touch of a button

All the cranes on the French site feature the LiUP crane operator elevator. Liebherr’s LiUP crane operator elevator is designed to transport two people or a payload of 200 kilogrammes. The crane operator gets to his workplace quickly and safely at the touch of a button. It also means that erection engineers no longer have to face an energy-sapping, time-consuming climb. The LiUP elevator is tailored to Liebherr tower systems and only requires one-time installation. The rails can be left in the tower system during the erection and dismantling processes.

The site is now so far advanced that the 250 EC-B 12 has been dismantled. The 420 EC-H 16 helped to carry out this work. Thanks to its easy-erection design, the EC-B crane was dismantled within a single day. LiConnect quick-release connections and the compact head with the slewing platform, cabin and switchgear cabinet ensure that the cranes can be dismantled and erected quickly and safely. Smooth dismantling was helpful in this particular project because the remaining cranes were able to restart their work quickly. The “To‑Lyon” is scheduled to be completed in spring 2023.

Downloads

Here you will find the press release and images for download.

Presseinformation Deutsch DOCX (190 KB)
Presseinformation Deutsch PDF (391 KB)
Press Information English DOCX (189 KB)
Press Information English PDF (385 KB)
Information Presse Français DOCX (190 KB)
Information Presse Français PDF (387 KB)
Información de Prensa Español DOCX (190 KB)
Información de Prensa Español PDF (356 KB)

Additional links

Top-slewing cranes

Contact

Daniel Häfele

Global Communication


Liebherr-Werk Biberach GmbH

Memminger Straße 120

88400 Biberach an der Riß

Germany