Layered for posterity

"I would never have thought that I would enjoy vacuum cleaning so much," says Adrian Führer, attaching the hose of the suction device to the machine. He taps the touchscreen. The device hums into action. Through the observation window, he watches his creation emerge from the grey dust. "It is always a great moment when the component is revealed in its full glory," he says. The industrial mechanic is responsible for the 3D printer at Liebherr-Aerospace: he sets it up for print jobs, fills it with titanium powder, prepares the laser for the computer-controlled melting of the material – and, last but not least, vacuums up the excess titanium powder. "I find 3D printing amazingly exciting. When I was asked if I wanted to work with the research team, I didn't have to think twice. I said yes straight away," says Adrian Führer.

In the Liebherr factory in Lindenberg, the 3D printer is located centrally between production, dispatch and assembly. In a production area surrounded by glass walls, at the centre of which stands the computer-controlled printing machine, which is taller than a person. A live transmission of what is currently happening in the printer is shown on a large monitor. Employees and visitors walking past frequently stop to take a look at the future of industrial production technology. In front of the printer stands a highly polished titanium component for an Airbus A320. "Funded by the Federal Ministry for Economic Affairs and Energy" reads the label.

Adrian Führer talks about his work with great enthusiasm. "The printer builds up a component from a large number of thin titanium layers, each just 30 to 60 micrometres thick," he says. "The laser travels across the titanium powder, following a design model precisely, and melts it down with millimetre precision using a blinding point of light. In this way, the component gradually takes form from the bottom up." The printer requires about 20 hours to print a valve block which will accommodate a maze of cables and pipes and can be used to control an aircraft's landing flap.

The future of 3D printing

3D printing – the future emerging from the laser melter

Additive manufacturing is the name given to a process which uses digital 3D design data to build up a component layer-by-layer by melting material. The term "3D printing" is used more and more often as a synonym for additive manufacturing. However, additive manufacturing is a better description, indicating that the process involved is a professional production process which differs significantly from conventional subtractive manufacturing methods. Instead of milling a part from a solid block, for example, additive manufacturing builds up components layer by layer from materials which come in fine-powder form. Materials available include a variety of different metals, plastics and composites.

One of the areas in which this manufacturing method is used is that of rapid prototyping, the construction of illustrative and functional prototypes. Product development and market launch times can be shortened significantly by this method. Additive manufacturing is now increasingly being adopted in series production. It opens up opportunities for large OEM manufacturers from a wide range of industries to differentiate themselves in the marketplace – in terms of new customer benefits, potential cost savings and achieving sustainability targets.

Free forms

Free forms – revolutionary layer-by-layer design

Using conventional technologies like milling, turning or casting, many complex geometries can be manufactured only to a restricted extent or at high cost. Additive manufacturing, by contrast, enables the design and production of high-strength lightweight structures which cannot be manufactured using conventional production methods. It therefore offers draughtsmen and designers maximum design freedom and enables the production of extremely complex structures. Any conceivable form that can be designed using a 3D CAD programme can be manufactured in this way. There are no restrictions whatsoever – even in the manufacture of hollow structures. This is possible because material is melted only at the points specified in the CAD design.

One major advantage of additive manufacturing is that it provides completely new ways of integrating functions. Thanks to tool-less laser technology, all the parts needed can be manufactured in a single step - including functional components such as valve blocks, tanks, cylinder housings and filters. As a result, the majority of the assembly steps that would otherwise be necessary do not apply. This brings savings in terms of money, weight and assembly space, simplifies logistics and minimises the probability of errors in production.

We need your consent This YouTube video is provided by Google*. If you load the video, your data - including your IP address - is transmitted to Google and may be stored and processed by Google inter alia in the USA. We have no influence over further data processing by Google. By clicking on "Accept", you consent to the transmission of data to Google for this video in accordance with Art. 6 (1) (a) GDPR and at the same time expressly consent to the transfer of data to the USA in accordance with Art. 49 (1) (a) GDPR. If you no longer wish to consent to each YouTube video individually in the future and wish to be able to load the videos without this blocker, you can also select "Always accept YouTube" and thereby consent to the associated data transmissions and transfers to Google and to the USA for all other YouTube videos which you open on our website in the future. Please note that, in the opinion of the European Court of Justice, there does not currently exist an adequate level of data protection in line with EU standards in the USA, and at present we cannot provide suitable safeguards to protect your data and offset this shortcoming. Possible risks to you of data transfer to the USA are that access by state authorities cannot be excluded and that your data could be processed for reasons of national security, criminal prosecution or for other purposes in the public interest of the USA, possibly without you being informed separately and without enforceable rights and effective means of redress being available to you. You can withdraw consent that you have given at any time with future effect via the settings. For further information, please see our Data Protection Declaration and Google's Privacy Policy. *Google Ireland Limited, Gordon House, Barrow Street, Dublin 4, Irland; Mutterunternehmen: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA
Powder

Made entirely of powder – the material of the future

Titanium is a metal that offers a range of advantages. It is not only light and mechanically stable, but is also biocompatible and has very good corrosion resistance. Titanium is therefore a highly sought-after material for additive manufacturing processes in high-tech areas such as aerospace, space exploration and medicine. In Lindenberg, the main titanium alloy used is Ti6Al4V, an alloy which is particularly suitable for aviation. The Liebherr colleagues in Toulouse work primarily with nickel alloys and plastics.

We need your consent This YouTube video is provided by Google*. If you load the video, your data - including your IP address - is transmitted to Google and may be stored and processed by Google inter alia in the USA. We have no influence over further data processing by Google. By clicking on "Accept", you consent to the transmission of data to Google for this video in accordance with Art. 6 (1) (a) GDPR and at the same time expressly consent to the transfer of data to the USA in accordance with Art. 49 (1) (a) GDPR. If you no longer wish to consent to each YouTube video individually in the future and wish to be able to load the videos without this blocker, you can also select "Always accept YouTube" and thereby consent to the associated data transmissions and transfers to Google and to the USA for all other YouTube videos which you open on our website in the future. Please note that, in the opinion of the European Court of Justice, there does not currently exist an adequate level of data protection in line with EU standards in the USA, and at present we cannot provide suitable safeguards to protect your data and offset this shortcoming. Possible risks to you of data transfer to the USA are that access by state authorities cannot be excluded and that your data could be processed for reasons of national security, criminal prosecution or for other purposes in the public interest of the USA, possibly without you being informed separately and without enforceable rights and effective means of redress being available to you. You can withdraw consent that you have given at any time with future effect via the settings. For further information, please see our Data Protection Declaration and Google's Privacy Policy. *Google Ireland Limited, Gordon House, Barrow Street, Dublin 4, Irland; Mutterunternehmen: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA
Music of the future

There's no such thing as can't – slightly crazy-sounding achievements from the relatively new world of 3D printing

3D printing first appeared over 20 years ago. This technology has been firing the imagination of researchers and developers ever since. What today is just a bold vision, might tomorrow pave the way for an exciting avenue of progress.

Clothing

Students from San Francisco came up with this idea during their studies, as they were looking at the method for manufacturing blood vessels from cardiovascular tissue. To date, tank tops, skirts and a beanie have been manufactured using the technology. The material used for this consists of a polyester/wool mix of nanofibers. Currently, the only material available is white, but work is being carried out on different colours and on other materials such as silk and acrylic mixes.

Food

Here, a computer is equipped with a technical application that allows it to transform an idea into a real product. Food printers are "fed" with foods, which can be combined, arranged and designed in a variety of ways. The majority of food cartridges are based on flavoured, coloured ingredients. However, the addition of fresh, natural products from which, for example, chocolate can be produced, is also well established. Some restaurants are already serving menus from a 3D printer.

Organs

From a purely technical point of view, it has for a long time been possible to print not only metal and plastic, but also biological tissues, even entire organs. To achieve this, living cells are blended with nutrients and gelatine to form a type of "bio-ink". The printed cells connect to one another and form complex structures. However, the big breakthrough has yet to be made.

Moon station

The European Space Agency ESA is working with 3D printing technologies on the construction of a lunar habitat. For this purpose, the London-based firm of architects Foster + Partners has developed a load-bearing "catenoid" dome, which has a wall with a cellular structure for defence against micrometeorites and cosmic radiation and is equipped with an inflatable pressure vessel to protect the astronauts.

Working in tandem with evolution

The castors on Johannes Walter's office chair have proved a worthwhile investment. He is forever pushing off with his foot and gliding the two metres over to Stefan Hermann. The two sit back to back in the office and at the moment they have a lot to discuss. Stefan Hermann is a simulation engineer. On his screen, he has an image of a complex mesh structure. "This is something that evolution came up with," he says. "The structure is modelled on a tree root. The branching structure of the root always produces the right balance between resource use, strength and sustenance for the tree. What evolution needed millions of years for, we were able to do using a computer, designing a lightweight joint for an aircraft landing gear component based on the same principle of optimisation," explains Hermann.

This is another reason Johannes Walter has moved across to him. The designer is playing a creative one-two with the simulation engineer. From Hermann's calculations, Walter creates a shape which will ultimately be integrated in the landing gear. On his computer, the component he has constructed looks like a crescent moon, the surface of which is full of holes like a Swiss cheese. "This saves on material and weight," says Walter, "and uses the strength structures calculated as being optimal." Almost any shape can thus be represented in CAD and then, using 3D printing, produced exactly as required by the developers for the target function.

We measure and document every step, however small, in the construction of the component. Errors are not an option.

Alexander Altmann

The two inventors are part of a six-person team led by Alexander Altmann, head of the Additive Manufacturing / Research & Technology project, which Liebherr launched six years ago in Lindenberg. "3D printing is a technology that is over 20 years old, but has recently experienced an enormous boom and offers exciting prospects, particularly in aircraft engineering," says Altmann. “Airbus recently flew on of our 3D printed spoiler actuator valve blocks on a flight test A380. The first-ever 3D printed primary flight control hydraulic component flown on an Airbus aircraft! The valve block offers the same performance as the conventional valve block made from a titanium forging, but it is 35% lighter in weight.”

Since the demands on aircraft components are extremely high, he and his team are primarily concerned with understanding additive manufacturing methods down to the last detail and setting up absolutely reliable production processes. "To this end, we measure and document every step, however small, in the construction of the component. Errors are not an option. There must not be even the slightest doubt as to the reliability and safety of the components and the material from which they are made."

We need your consent This YouTube video is provided by Google*. If you load the video, your data - including your IP address - is transmitted to Google and may be stored and processed by Google inter alia in the USA. We have no influence over further data processing by Google. By clicking on "Accept", you consent to the transmission of data to Google for this video in accordance with Art. 6 (1) (a) GDPR and at the same time expressly consent to the transfer of data to the USA in accordance with Art. 49 (1) (a) GDPR. If you no longer wish to consent to each YouTube video individually in the future and wish to be able to load the videos without this blocker, you can also select "Always accept YouTube" and thereby consent to the associated data transmissions and transfers to Google and to the USA for all other YouTube videos which you open on our website in the future. Please note that, in the opinion of the European Court of Justice, there does not currently exist an adequate level of data protection in line with EU standards in the USA, and at present we cannot provide suitable safeguards to protect your data and offset this shortcoming. Possible risks to you of data transfer to the USA are that access by state authorities cannot be excluded and that your data could be processed for reasons of national security, criminal prosecution or for other purposes in the public interest of the USA, possibly without you being informed separately and without enforceable rights and effective means of redress being available to you. You can withdraw consent that you have given at any time with future effect via the settings. For further information, please see our Data Protection Declaration and Google's Privacy Policy. *Google Ireland Limited, Gordon House, Barrow Street, Dublin 4, Irland; Mutterunternehmen: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA

Excited about the future

Alexander Altmann's team has convened for a regular meeting in the conference room. André Danzig has only been in the team for a year and a half. Nonetheless, the PhD physicist is already a kind of "veteran" of additive manufacturing. Before he came to Lindenberg, he worked for a 3D printer manufacturer for over 15 years. Then one day he decided he wanted to find out more about the user side. "What does simulation tell us? How can we achieve design stability if we print not only the individual components but the entire control element, integrating all the functions at the same time?" Danzig wants to know. Stefan Hermann has already calculated all that and has also shared his ideas about it with the designer. "We will definitely achieve it," says Hermann, presenting the relevant considerations to the team.

  • Working in tandem with nature – the aircraft that comes out of the printer
    It will still be a while until this vision becomes a reality. However, many aircraft landing gear and flight control components are already being manufactured additively.

    Working in tandem with nature – the aircraft that comes out of the printer

    It will still be a while until this vision becomes a reality. However, many aircraft landing gear and flight control components are already being manufactured additively.

  • The blast furnace has had its day
    Titanium components of the very highest quality are produced in the 3D printer using a laser melting process.

    The blast furnace has had its day

    Titanium components of the very highest quality are produced in the 3D printer using a laser melting process.

  • Smoothened
    In the sandblast shop, the components are bombarded with different blasting materials so that in the end their surfaces appear highly polished.

    Smoothened

    In the sandblast shop, the components are bombarded with different blasting materials so that in the end their surfaces appear highly polished.

  • Relaxing in the heat chamber
    At around 700 degrees, the material from the printer "relaxes". It becomes firmer and is protected from stress cracks.

    Relaxing in the heat chamber

    At around 700 degrees, the material from the printer "relaxes". It becomes firmer and is protected from stress cracks.

  • Finishing
    In the titanium dip tank, the surface receives the finishing touches in a galvanisation process. Here, the special liquid used for titanium reaches even the remotest corners of a labyrinthine component.

    Finishing

    In the titanium dip tank, the surface receives the finishing touches in a galvanisation process. Here, the special liquid used for titanium reaches even the remotest corners of a labyrinthine component.

  • We need your consent This YouTube video is provided by Google*. If you load the video, your data - including your IP address - is transmitted to Google and may be stored and processed by Google inter alia in the USA. We have no influence over further data processing by Google. By clicking on "Accept", you consent to the transmission of data to Google for this video in accordance with Art. 6 (1) (a) GDPR and at the same time expressly consent to the transfer of data to the USA in accordance with Art. 49 (1) (a) GDPR. If you no longer wish to consent to each YouTube video individually in the future and wish to be able to load the videos without this blocker, you can also select "Always accept YouTube" and thereby consent to the associated data transmissions and transfers to Google and to the USA for all other YouTube videos which you open on our website in the future. Please note that, in the opinion of the European Court of Justice, there does not currently exist an adequate level of data protection in line with EU standards in the USA, and at present we cannot provide suitable safeguards to protect your data and offset this shortcoming. Possible risks to you of data transfer to the USA are that access by state authorities cannot be excluded and that your data could be processed for reasons of national security, criminal prosecution or for other purposes in the public interest of the USA, possibly without you being informed separately and without enforceable rights and effective means of redress being available to you. You can withdraw consent that you have given at any time with future effect via the settings. For further information, please see our Data Protection Declaration and Google's Privacy Policy. *Google Ireland Limited, Gordon House, Barrow Street, Dublin 4, Irland; Mutterunternehmen: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA

    Alexander Altmann likes the idea that: "3D printing will fundamentally change not only aircraft components and entire aircraft structures, but also other products such as cars and toys. It will even be possible to produce foods and medical implants. I am sure that its impact over the next 20 years will be huge."

    The Group Magazine

    Breath-taking deployments, promising research projects and people achieving great things – take a look behind the scenes of the Liebherr Group.

    To the magazine

    Electric aviation launches

    Better energy supplies, lighter weights and more efficient aircraft all round: Liebherr has started conducting major research into electric systems at three different sites which could revolutionise the field of aviation in the near future.

    To the story

    Technologies for the future

    Constant investment into research and development play a key role in our long-term vision and strategy. This allows Liebherr-Aerospace and Transportation Systems to develop technologies that are employed in next generation aircraft and rail vehicles as well as in the automotive industries.

    Technologies for the future