Shank-type shaper cutters DIN 3972/II

High-quality stock tools from Liebherr are available within a very short time. Their impressive quality makes longer tool life possible. The standard tools are manufactured from ASP2052 / S390 material with an Alcrona Pro coating. The range of stock tools also offers customers great flexibility. Below you will find the available models in the category shank-type shaper cutters DIN 3972/II. The stock tools are available within a short space of time, and include a measurement report. MK2 = Morse taper 2, l2=40 mm, d5=M6 MK 4 = Morse taper 4, l2=71 mm, d5=M16, z2 = Number of teeth on workpiece.
Module 1.00 - 5.00 mm
Number of teeth 10 - 24
Pressure angle 20 °
Taper MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK4 / MK2 / MK4 / MK4 / MK4
length I0 100.00 - 150.00 mm


Table is scrollable
Module (mm) Number of teeth d0 (mm) Taper z2min length I0 (mm) Stock number Inquiries
1.00 16 16.00 MK2 36 100.00 W 510 011 02
1.00 24 24.00 MK2 50 100.00 W 510 021 02
1.25 16 20.00 MK2 36 100.00 W 512 521 02
1.50 10 15.00 MK2 24 100.00 W 515 011 02
1.50 16 24.00 MK2 36 100.00 W 515 021 02
2.00 10 20.00 MK2 24 100.00 W 520 011 02
2.00 14 28.00 MK2 36 100.00 W 520 021 02
2.50 10 25.00 MK2 24 100.00 W 525 011 02
2.50 14 35.00 MK4 34 150.00 W 525 021 02
3.00 10 30.00 MK2 24 100.00 W 530 011 02
3.00 14 42.00 MK4 34 150.00 W 530 021 02
4.00 12 48.00 MK4 28 150.00 W 540 011 02
5.00 12 60.00 MK4 28 150.00 W 550 011 02
To the inquiry list